Abstract:Adjustable-ring-mode laser welding (ARM-LW) offers a novel approach to minimize porosity in medium-thickness aluminum alloy joints. However, the suppression mechanism and optimization strategy of reducing porosity for ring-mode laser remain unclear. A combination of experiment and simulation was utilized to narrow the gap. The findings demonstrated that ring-mode laser effectively slows the increase of porosity with rising penetration depth compared to traditional Gaussian laser welding. The pore formation involves bubble generation induced by keyhole instability and bubbles being captured by the solidification front. As ring power share increases, the keyhole opening widens and becomes more stable, which enhances the energy absorption of keyhole walls, particularly in the bottom and middle sections. This enhances the keyhole stability and reduces bubble formation resulting from keyhole collapse. Additionally, as ring power share grows, a decrease of 63.2 % of -X-velocity suggests that bubbles are moving at a slower pace away from the keyhole bottom, increasing the chances of them being captured by keyhole and eventually vanishing; however, a decrease of 52.4 % of +Z-velocity raises the possibility of bubbles being trapped by solidification front if not caught by keyhole. Finally, a comprehensive discussion and analysis of how to mitigate porosity during ARM-LW are presented. A criterion—minimizing penetration to spot diameter ratio (PDR)—was proposed to guide ring power share selection. The insights into keyhole fluctuation and bubble evolution mechanisms outlined here can guide mitigating porosity in laser welding of medium-thickness aluminum alloy plates.

Porosity inhibition of aluminum alloy by power-modulated laser welding and mechanism analysis

Minimizing defects and controlling the morphology of laser welded aluminum alloys using power modulation-based laser beam oscillation

Mitigation of porosity in adjustable-ring-mode laser welding of medium-thick aluminum alloy

Numerical study of keyhole dynamics and porosity formation during high‐power oscillating laser welding of medium‐thick aluminum alloy plates

Experimental Investigation and Numerical Study on the Elimination of Porosity in Aluminum Alloy Laser Welding and Laser–GMA Welding

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

Effect of beam oscillation frequency on porosity in laser welding of aluminum alloy lap-butt joints

Suppressing Porosity of a Laser Keyhole Welded Al-6Mg Alloy Via Beam Oscillation

Study of porosity suppression in oscillating laser-MIG hybrid welding of AA6082 aluminum alloy

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Experimental and Numerical Study on the Effect of Increasing Frequency on the Morphology and Microstructure of Aluminum Alloy in Laser Wobbling Welding

Porosity Formation and Its Effect on the Properties of Hybrid Laser Welded Al Alloy Joints

Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation

Mechanisms of the Porosity Formation During the Fiber Laser Lap Welding of Al 5754 Sheets

The effect of laser oscillation welding on porosity suppression for medium-thick Al alloy with high Mg content

Power modulation and its effect on microstructural evolution during laser oscillating welding of steel to aluminum alloy

Porosity Mechanism of Fiber Laser Welding with Filler Wire for Aluminum Alloy

MECHANISMS OF THE POROSITY FORMATION DURING THE FIBER LASER LAP WELDING OF ALUMINIUM ALLOY

Mechanism analysis on suppressing porosity in laser-MIG hybrid welding of aluminum alloy via external magnetic field