Abstract:In large-scale welding processes involving complex geometries, variations in gap dimensions and the transition of filler wire form distinctive molten pool flow behaviors, significantly affecting weld formation and quality. This paper investigates the differences in the laser self-melting and wire-filling welding pool behavior of titanium alloy with variable gaps through both simulation and experimentation. An innovative three-dimensional transient heat-flow coupling model is developed to simulate laser welding with variable gap structures, incorporating the dynamics of the welding wire-filling process. The different laser welding modes and the filling process under the variable gap structure were numerically simulated. The results indicate that the maximum flow rate of the laser self-melting pool remains stable in proximity to the keyhole, reaching a maximum of approximately 2.491 m/s, with molten metal entering through the area surrounding the keyhole. As the gap size gradually increases to 0.2 mm during the laser self-fusion welding stage, keyhole instability becomes more pronounced. In transitioning from laser self-fusion to wire-filling welding, the welding wire behavior can be divided into three stages. The molten metal at the end of the welding wire is transferred to the liquid melt pool through a liquid metal bridge. The flow rate of this bridge initially rises before gradually decreasing, reaching a maximum flow rate of 1.606 m/s. Notably, the welding wire lags approximately 0.6 mm behind the laser's focal point, with the narrowest width of the liquid bridge measuring about 0.89 mm. Based on the simulation results and considering the melting transition time of the welding wire, the initiation time for the welding wire has been further adjusted to the first 10 ms when the gap threshold reaches 0.2 mm. Experimental verification confirms the successful laser welding of a 2 mm variable gap structure thin plate. This study elucidates the melt pool flow, keyhole fluctuations, and metal transition behaviors during the laser welding process, contributing to a deeper understanding of the complex heat and mass transfer dynamics inherent in variable gap structure laser self-melting and wire-filling welding. Ultimately, these insights aim to enhance the application of laser welding in adaptive welding for large structural components.

Fluid Flow Characteristics and Porosity Behavior in Full Penetration Laser Welding of a Titanium Alloy

Thermal and Fluid Flow Characteristics and their Relationships with Porosity in Laser Welding of AA5083

Numerical Analysis of Effect of Welding Positions on Formation Quality During Laser Welding of Titanium Alloys

A Study on the Influences of Welding Position on the Keyhole and Molten Pool Behavior in Laser Welding of a Titanium Alloy

Numerical Simulation on Porosity Formation and Suppression in Oscillation Laser Welding of Ti-6Al-4V Alloy

Effect of beam defocusing on porosity formation mechanism in laser-MIG hybrid welded titanium alloy joints

Melt Flow and Porosity Formation in Pulsed Laser Keyhole Welding

Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling During Deep-Penetration Laser Welding

Study on keyhole characteristics and weld pool dynamics of Ti6Al4V alloy fabricated by continuous wave laser beam welding

Study of Molten Pool Dynamics and Porosity Formation Mechanism in Full Penetration Fiber Laser Welding of Al-alloy

Numerical analysis of the effect of welding positions on formation quality during laser welding of TC4 titanium alloy parts in aerospace industry

Porosity Formation and Prevention in Pulsed Laser Welding

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Effect of Welding Parameters on Spatter Formation in Full-Penetration Laser Welding of Titanium Alloys

Porosity Sensitivity of A356 Al Alloy During Fiber Laser Welding

Simulation on the Melt Flow in Laser Full Penetration Welding with a Model Including a Non-Rotational Symmetry Keyhole Based on Energy Balance

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

Transport Phenomena and Keyhole Dynamics During Pulsed Laser Welding

Documenting weld pool behavior differences in variable-gap laser self-melting and wire-filling welding of titanium alloys

Effect of plate thickness on weld pool dynamics and keyhole-induced porosity formation in laser welding of Al alloy

Formation and Influence Mechanism of Keyhole-Induced Porosity in Deep-Penetration Laser Welding Based on 3d Transient Modeling