Abstract:For a typical cryogenic pipe chilldown event, film boiling plays a dominate role in the view of temperature decrease range and time cost proportion. In the chilldown process, Leidenfrost temperature (TL) denotes the termination of film boiling and could be utilized to represent the chilldown progress to a certain extent. Therefore, TL is significant for the cryogenic chilldown but the associated researches are still insufficient. In the present study, an experimental system, adopting liquid nitrogen (LN2) as the working fluid, is built to perform cryogenic chilldown tests under different conditions, and the variation of TL is concerned to assist the chilldown performance analysis. Current predictive models on TL are evaluated and the influences of existing chilldown acceleration approaches are discussed in virtue of TL variation. The results demonstrate that the chilldown test data sourced from different literature appear remarkable discrepancy with one another, and the model proposed by Darr and Hartwig could be suggested to estimate TL. Moreover, significant rise in TL could be observed when a chilldown acceleration approach is adopted, which demonstrates that TL variation could be used to assess the acceleration approach. If a low-conductivity coating layer pipe is adopted, increasing Re does not affect TL significantly. Comparatively, when using a micro-fin pipe in the chilldown event, Re influence on TL is still apparent. Even for the micro-fin case with Δ=50mm, the differences of different boiling regimes are hard to be recognized, and a throughout high heat flux could dominate the wall temperature decrease process. Therefore, balancing consideration of micro-fin structure and inlet Re should be involved in the design of a micro-fin pipe. In addition, although both of the low-conductivity coating layer technique and the micro-fin tube could realize the purpose of chilldown acceleration, the mechanisms and the characteristics are very different. The micro-fin pipe has the advantages of reducing chilldown time as well as rapidly taking away the thermal energy from the metal wall region. The low-conductivity coating layer appears the advantages of facilitating the liquid-wall heat transfer occurrence and reducing the flow resistance, but the existence of the coating layer simultaneously restrains the thermal removal from the metal wall region.

Thermal Resistance Analysis of Cryogenic Frosting and Its Effect on Performance of LNG Ambient Air Vaporizer

Study of Frosting on a Cryogenic Surface from a Perspective of Thermal Resistance Analysis

Influence of Fins Number and Frosting on Heat Transfer through Longitudinal Finned Tubes of LNG Ambient Air Vaporizers

Numerical simulation analysis of a heat transfer tube in SuperORV

Novel air separation unit cooled by liquefied natural gas cold energy and its performance analysis

Experiment on Frost Characteristic of Air-warmed Cryogenic Finned-tube Vaporizer

Experimental study on heat transfer characteristics of air-heating cryogenic finned-tube vaporizer under frosting conditions

Review on Numerical Simulation of frosting behavior on Ambient air vaporizer

An Experimental Study on the Air Side Heat Transfer Performance of the Perforated Fin-Tube Heat Exchangers under the Frosting Conditions

Frost Layer Growth Behavior Study on a Cryogenic Surface with Water Vapor Content <1000 Ppmv

Numerical Simulation on Frost of Cryogenic Finned-Tube Vaporizer Based on Fractal Theory

Heat transfer analysis of frosting under cryogenic condition

Frost model and numerical simulation of air-heating fin-tube vaporizer

Dynamic performance evaluation of LNG vaporization system integrated with solar-assisted heat pump

Experimental study on frost layer's thermal conductivity of cryogenic vertical plate under natural convection condition

Experimental study on heat transfer characteristics of flowing air on the surface of finned-tube vaporizer under frosting conditions

A modeling study of spatial and temporal frost growth on the edge of windward fins for a tube-finned heat exchanger

Analysis on unsteady frosting rate for air-heated finned-tube vaporizer

Experimental study of frosting characteristics of trace water vapor under cryogenic wind tunnel conditions

Mechanisms of Trace Water Vapor Frosting on a Cryogenic Surface in Nitrogen Gas Flow

Variation of Leidenfrost temperature in liquid nitrogen pipe chilldown process and its application in chilldown performance analysis