Abstract:For a typical cryogenic pipe chilldown event, film boiling plays a dominate role in the view of temperature decrease range and time cost proportion. In the chilldown process, Leidenfrost temperature (TL) denotes the termination of film boiling and could be utilized to represent the chilldown progress to a certain extent. Therefore, TL is significant for the cryogenic chilldown but the associated researches are still insufficient. In the present study, an experimental system, adopting liquid nitrogen (LN2) as the working fluid, is built to perform cryogenic chilldown tests under different conditions, and the variation of TL is concerned to assist the chilldown performance analysis. Current predictive models on TL are evaluated and the influences of existing chilldown acceleration approaches are discussed in virtue of TL variation. The results demonstrate that the chilldown test data sourced from different literature appear remarkable discrepancy with one another, and the model proposed by Darr and Hartwig could be suggested to estimate TL. Moreover, significant rise in TL could be observed when a chilldown acceleration approach is adopted, which demonstrates that TL variation could be used to assess the acceleration approach. If a low-conductivity coating layer pipe is adopted, increasing Re does not affect TL significantly. Comparatively, when using a micro-fin pipe in the chilldown event, Re influence on TL is still apparent. Even for the micro-fin case with Δ=50mm, the differences of different boiling regimes are hard to be recognized, and a throughout high heat flux could dominate the wall temperature decrease process. Therefore, balancing consideration of micro-fin structure and inlet Re should be involved in the design of a micro-fin pipe. In addition, although both of the low-conductivity coating layer technique and the micro-fin tube could realize the purpose of chilldown acceleration, the mechanisms and the characteristics are very different. The micro-fin pipe has the advantages of reducing chilldown time as well as rapidly taking away the thermal energy from the metal wall region. The low-conductivity coating layer appears the advantages of facilitating the liquid-wall heat transfer occurrence and reducing the flow resistance, but the existence of the coating layer simultaneously restrains the thermal removal from the metal wall region.

Variation of Leidenfrost temperature in liquid nitrogen pipe chilldown process and its application in chilldown performance analysis

Experimental study on liquid nitrogen pipe chilldown performance under pulse flow conditions and adopting micro-fin pipe

Experiments and numerical simulation of dynamic cool-down process of stainless steel plate in liquid nitrogen bath

Experimental study on cryogenic chilldown performance through a thick-wall tube

Experimental investigation on cryogenic chilldown performance under high-Reynolds number condition and using interior micro-fin structure

An experimental study on liquid nitrogen pipe chilldown and heat transfer with pulse flows

Experimental investigation on chill-down process of cryogenic flow line

An experimental study on flow patterns and heat transfer characteristics during cryogenic chilldown in a vertical pipe

Cryogenic chilldown process under low flow rates

Characteristics of boiling transitions during liquid oxygen chill-down in a horizontal pipe with an injector on the exit

Experimental Investigation on Cryogenic Line Chill-Down Process by Using Liquid Nitrogen

Transient modeling of cryogenic two-phase flow boiling during chill-down process

Investigation on heat transfer in line chill-down process with various cryogenic fluids

Experimental Study on Fast Quenching of Cryogenic LN2 Flow Through Interior Micro-Fin Tube

Experimental research and numerical simulation on cryogenic line chill-down process

Experimental investigation on line chill-down process by liquid argon

An experimental study on terrestrial cryogenic tube chilldown II. Effect of flow direction with respect to gravity and new correlation set

Cryogenic Two-Phase Flow During Chilldown

Transient cryogenic chill down process in horizontal and inclined pipes

Cryogenic Boiling and Two-Phase Flow during Pipe Chilldown in Earth and Reduced Gravity