Abstract:High-efficient cold energy utilization of cryogenic liquid is beneficial to propellant mass saving in transfer pipe chilldown operation, and a pulse liquid flow approach has been proposed to reach this purpose. However, the liquid inlet pattern influence on the overall performance of chilldown process is still unclear. In the present study, a cryogenic chilldown test platform, using liquid nitrogen (LN2) as the working fluid and covering the inlet Reynolds number (Re) range of 5000–45000, is constructed to investigate the pulse flow effect on cryogenic chilldown behaviors. Different pipe sections, including two straight pipes and three micro-fin pipes, are tested under different inlet conditions, and the data on chilldown time and liquid consumption are significantly analyzed. The test results show that a pulse flow inlet produces periodic fluctuation of heat flux during the chilldown progress, and a longer time is required to reach the chilldown purpose when compared to a continuous liquid inflow situation. To attain chilldown time saving, both of the approaches by increasing inlet Re and adopting micro-fin pipe could yield satisfactory results. Compared to the straight pipe case with wall thickness of 2 mm, the micro-fin pipe with fin interval of 50 mm (Δ = 50 mm) saves time cost by 40–45 %. However, the approach of pulse liquid flow produces a significant increase in chilldown time. In the view of liquid consumption, the pulse LN2 flow approach could not produce a definite effect in reducing liquid mass, which is different from the liquid hydrogen (LH2) chilldown situation. By contrast, the micro-fin pipe yields an excellent effect in saving liquid mass, with the maximum saving of 65 % when compared to a conventional continuous liquid case. Therefore, the micro-fin pipe could simultaneously reach the purposes of chilldown time reduction and liquid consumption saving. The chilldown thermal efficiency is also analyzed in the present studies, and the results demonstrate that there is no apparent increase in thermal efficiency by adopting a pulse flow approach, but the micro-fin pipe gives rise to a significant increase in thermal efficiency. When adopting a pulse flow operation with a longer valve off period, a longer chilldown time is needed but the liquid saving effect is negligible.

An experimental study on flow patterns and heat transfer characteristics during cryogenic chilldown in a vertical pipe

Cryogenic Boiling and Two-Phase Flow during Pipe Chilldown in Earth and Reduced Gravity

Experimental investigation on chill-down process of cryogenic flow line

Cryogenic chilldown process under low flow rates

An experimental study on liquid nitrogen pipe chilldown and heat transfer with pulse flows

Transient cryogenic chill down process in horizontal and inclined pipes

An experimental study on terrestrial cryogenic tube chilldown II. Effect of flow direction with respect to gravity and new correlation set

A Direct Numerical Simulation of Axisymmetric Cryogenic Chill Down in a Pipe in Microgravity

Cryogenic Two-Phase Flow and Heat Transfer Under Terrestrial and Microgravity

The effect of reduced gravity on cryogenic nitrogen boiling and pipe chilldown

Cryogenic Two-Phase Flow During Chilldown

Influence Of Pressurization On Cooling-Down Process With A Gas-Phase Inlet Natural Circulation For A Cryogenic Pump System

Experimental Investigation on Cryogenic Line Chill-Down Process by Using Liquid Nitrogen

Experimental investigation on heat transfer characteristics in cryogenic chilldown of a helically coiled tube

Review of Cryogenic Boiling Heat Transfer during Pipe Chilldown

Experimental study on liquid nitrogen pipe chilldown performance under pulse flow conditions and adopting micro-fin pipe

Two-Phase Flow and Heat Transfer During Chilldown of a Simulated Flexible Metal Hose Using Liquid Nitrogen

Investigation of transient chill down phenomena in tubes using liquid nitrogen

Comparison of cryogenic flow boiling in liquid nitrogen and liquid hydrogen chilldown experiments