Abstract:In certain extreme conditions characterized by ultra-low water vapor content and ultra-low temperatures (e.g. cryogenic wind tunnel), trace water vapor frosting can also pose significant hazards. Considering the crucial role of initial nucleation on subsequent frosting processes, this study firstly investigated and compared the nucleation characteristics of frosting at different water vapor contents (0.1-1000 ppmv) from humid air to trace water vapor based on classical nucleation theory. The preferred nucleation phase diagrams and critical nucleation conditions were analyzed. Sensitivity of the nucleation mass transfer rate, as well as the frosting pathways were further identified. Results show that the nucleation characteristics of trace water vapor frosting (<100 ppmv) is significantly different from that of humid air frosting (>1000 ppmv). Trace water vapor frosting is more inclined towards desublimation nucleation due to its lower nucleation temperature and larger critical contact angle. The critical contact angles for 1000 ppmv, 100 ppmv and 0.1 ppmv are 49 degrees, 75 degrees and 120 degrees, respectively. Furthermore, trace water vapor nucleation requires a greater subcooling degree, has a smaller critical nucleation radius, and is highly sensitive to surface contact angle and further-subcooling degree. At a surface contact angle of 120 degrees, the nucleation subcooling degree of 0.1 ppmv is 2.9 K greater than that of 1000 ppmv. This study helps understanding the nucleation characteristics under different water vapor content conditions, which indicates that reducing subcooling degree and increasing contact angle are more effective anti-frosting methods than reducing water vapor content for trace water vapor frosting.

Frost Layer Growth Behavior Study on a Cryogenic Surface with Water Vapor Content <1000 Ppmv

Study of Frosting on a Cryogenic Surface from a Perspective of Thermal Resistance Analysis

Experimental study of frosting characteristics of trace water vapor under cryogenic wind tunnel conditions

Mechanisms of Trace Water Vapor Frosting on a Cryogenic Surface in Nitrogen Gas Flow

Impact of Initial Cooling Process on Frosting Characteristics of a Cryogenic Surface under Different Water Vapor Content Conditions

Theoretical Analysis of the Initial Nucleation Characteristics of Trace Water Vapor Frosting on a Cryogenic Surface

Experiment Study on Unsteady Frosting of Cryogenic Vertical Plate Surface under Natural Convection Conditions

Experimental Study of Frost Crystals Dendrite Growth on Two Neighboring Separate Frozen Water Drops on a Cryogenic Cold Surface under Natural Convection Conditions

Experimental and Numerical Investigations of Frost Formation on Wavy Plates

Heat transfer analysis of frosting under cryogenic condition

Visual and Theoretical Analyses of the Early Stage of Frost Formation on Cold Surfaces

Frost-Air Interface Characterization Under Natural Convection

Experimental study on frost formation on a cold surface in low atmospheric pressure

Experimental study on frost layer's thermal conductivity of cryogenic vertical plate under natural convection condition

Local Variation of Frost Layer Thickness and Morphology

Numerical Simulation on Frost of Cryogenic Finned-Tube Vaporizer Based on Fractal Theory

Mesoscale Investigation of Frost Formation on a Cold Surface

Visualization of cold surface frosting

Observations of Early-Stage Frost Formation on a Cold Plate in Atmospheric Air Flow

Experiment on Frost Characteristic of Air-warmed Cryogenic Finned-tube Vaporizer

Real-time Mass Detection of Trace Water Vapor Frosting on a Cryogenic Surface Based on Quartz Crystal Microbalance (QCM) Sensor

Frost Layer Growth Behavior Study on a Cryogenic Surface with Water Vapor Content &lt;1000 Ppmv