Abstract:Silicon carbide (SiC) power devices possess many beneficial properties for power electronics applications, but commercial 62-mm SiC power module packages with the direct drop-in replacement of Si devices limit many benefits of these SiC power devices. To fully utilize the advantages of the SiC power devices, this article presents a low-profile and high power density packaging solution of a 62-mm 1200-V/300-A SiC power module with enhanced electrical and thermal performance. The design optimizations on layout, chip placement, and terminal structure are compatible with the conventional module fabrication processes. An increase of power density by threefold is achieved with a low-profile package by reducing the height of the terminal connectors. Moreover, lower voltage overshoots of gate–source and drain–source of the proposed module are demonstrated due to low inductance in both gate and power loops. Thermal simulations show that the proposed module has a lower peak junction temperature and a more balanced temperature distribution among paralleled devices. Finally, the commercial and fabricated modules are characterized experimentally under the same conditions. Both simulation and experimental results show that the gate and power loop inductances of the proposed module are reduced by 96% and 76%, respectively. Moreover, the total switching loss and drain–source voltage overshoot are reduced by 44% and 54%, respectively, at 300 A using a 2- $Omega $ external gate resistor.

A High Performance Embedded SiC Power Module Based on a DBC-Stacked Hybrid Packaging Structure

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

A Novel SiC MOSFET Module for High-power Soft-switching Converter

A Highly Integrated Multichip SiC MOSFET Power Module With Optimized Electrical and Thermal Performances

A SiC Double-Sided Stacked Wire-Bondless Power Module for High-Frequency Power Electronic Applications

A Novel Multiple DBC-staked Units Package to Parallel More Chips for SiC Power Module

Design of a Novel Double Sided Cooling SiC Power Module Based on Multiple DBC-Stacked

Performance Optimization of A 1.2kv SiC High Density Half Bridge Power Module in 3D Package

Investigation of Low-Profile, High-Performance 62-mm SiC Power Module Package

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

High Performance SiC Power Module Based on Repackaging of Discrete SiC Devices

Design and Evaluation of a Face-Down Embedded SiC Power Module With Low Parasitic Inductance and Low Thermal Resistance

Multichip Parallel Double-Sided Cooling Silicon Carbide Power Module With Low Parasitic Inductance and Balanced Dynamic Current

A Quasi-Two-Level Medium-Voltage SiC MOSFET Power Module with Low Loss and Voltage Self-Balance

Design, Packaging and Evaluation of an All-SiC-Based Four-Level ANPC Power Module

Compact Sandwiched Press-Pack SiC Power Module With Low Stray Inductance and Balanced Thermal Stress

Interleaved Planar Packaging Method of Multichip SiC Power Module for Thermal and Electrical Performance Improvement

A GaN HEMT Integrated Power Module with Silver Sintering Processes

Analysis of A Low-Inductance Packaging Layout for Full-Sic Power Module Embedding Split Damping

1700 V full-SiC half-bridge power module with low switching loss

Design and evaluation of press-pack SiC MOSFET