Abstract:This paper introduced a novel approach to enhance the vertical scanning angle of a large aperture 2D electromagnetic micromirror through the utilization of a cascaded torsional beam design. The primary objective was to increase the vertical scanning angle without compromising the robustness, which was achieved by optimizing the trade-off between the rotation angle and the first mode of resonant frequency. The cascaded design provides flexibility to either increase the outer frame's rotation angle without sacrificing torsional stiffness or enhance the torsion beam's stiffness while maintaining the same rotation angle, thus elevating the first-mode resonant frequency and overall robustness. The effectiveness of the cascaded design was demonstrated through a comparative study with a non-cascaded 2D micromirror possessing the same aperture size, torque, and mass moment of inertia. Theoretical analysis and finite-element simulation are employed to determine critical parameters such as the stiffness ratio between the cascaded torsion beams, and to predict improvements in the scanning angle and primary resonant frequency brought by the cascaded design. Prototypes of both cascaded and non-cascaded designs are fabricated using a flexible printed circuit board combined with Computer numerical control (CNC) machining of a Ti-alloy thin film, confirming the superior performance of the cascaded 2D micromirror. The cascaded design achieved vertical scanning angles up to 26% higher than the traditional design when both were actuated at close resonance frequencies. Additionally, the micromirror was successfully integrated into a 3D LiDAR system. The light detection and ranging (LiDAR) system was modelled in Zemax OpticStudio to find the optimized design and assembly positions.

A Silicon Optical Bench with Vertically-Oriented Micromirrors for Active Beam Steering

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

A Poly-Si-Based Vertical Comb-Drive Two-Axis Gimbaled Scanner for Optical Applications

Compact Integrated Waveguide Turning Mirror in SOI

A polymer trench filling based silicon isolation technique and its application to two-axis scanning comb-drive micromirrors

A Semisolid Micromechanical Beam Steering System Based on Micrometa-Lens Arrays

Design, Fabrication and Characterization of Novel Micromirror with Vertical Torsion Comb Driver

Modeling and Optimization of a Novel ScAlN-Based MEMS Scanning Mirror with Large Static and Dynamic Two-Axis Tilting Angles

Novel Piezoelectric Actuation Mechanism for a Gimbal-Less Mirror in 2D Raster Scanning Applications

Design of an Electrostatic Silicon Torsion Micromirror for Low Drive Voltage and Wide Angle MEMS Optical Switch Applications

Reduced-Order Modelling of the Bending of an Array of Torsional Micromirrors

Design and control of a fast steering mirror based on flexible supports and piezoelectric ceramic actuators

An Improved Electrostatically-Driven Micro Torsion Mirror Fabricated by Silicon Micromachining for Optical Switching Devices

A Lateral MOS-Capacitor Enabled ITO Mach-Zehnder Modulator for Beam Steering

Steering Mirror System with Closed-Loop Feedback for Free-Space Optical Communication Terminals

Optical-Electromechanical Performance of Mems Tilting Micro-Mirrors for Aon Communication System

Design and investigation of dual-axis electrostatic driving MEMS scanning micromirror

A Silicon-based Scanning Micromirror Actuated by Piezoelectric Cantilevers Using PZT

Micromirror Arrays as Optical Phase Modulators for Free-Space Beam Steering

Hybrid Electrostatic Actuator for Micromirror Tilting

Cascaded 2D Micromirror with Application to LiDAR