Abstract:Boron carbide (B4C) ceramics with enhanced mechanical properties were fabricated by incorporating nano boron nitride (nano-BN), obtained through high-energy ball milling (HEBM) using ZrO2 balls as the medium, and utilizing the spark plasma sintering (SPS) technique. During the densification process of B4C/nano-BN composite powders, an in-situ reaction between the B4C matrix and ZrO2 resulted in the formation of ZrB2 ceramic phases at 1200-1300 degrees C. Additionally, the rapid sintering densification temperature of composites is reduced to 1500-1700 degrees C, approximately 80 degrees C lower than that required for pure B4C ceramics. Notably, while maintaining a high relative density (99.5 %), the Vickers hardness, flexural strength, and fracture toughness of B4C ceramics reinforced with synergistic effects of nano-BN and ZrB2 fabricated at 1750 degrees C are significantly improved to reach values of 36.8 +/- 0.15 GPa, 701 +/- 12 MPa, and 5.01 +/- 0.13 MPa m1/2 respectively; representing an increase of 3.5 GPa (10.5 %), 225 MPa (47.3 %), and 1.72 MPa m1/2 (52.3 %) compared to pure B4C ceramics alone. The multiple reinforcement mechanisms including pinning effects provided by nano-BN and in-situ formed ZrB2 ceramic phases, B4C/ZrB2 grain boundary pressure and intracrystalline pressure within B4C, interlayer dislocations of nano-BN and turbulent layer of B4C/BN boundaries contribute to energy dissipation during fracture processes, such as crack deflection, bridging, propagation hindrance and branching effect; ultimately resulting in exceptional strength-toughness-hardness integrated B4C-based ceramics.

Bioinspired Tough and Strong ZrB2-SiCw/Ti–Nb–Ti Hybrid Composites with a Hierarchical Ceramic-Metal Architecture

Strong and Tough ZrB2 Materials Using a Heterogeneous Ceramic-Metal Layered Architecture

Developing High Toughness Laminated HfB2-SiC Ceramics with Ductile Nb Interlayer

Multiscale Toughening of ZrB2‐SiC‐Graphene@ZrB2‐SiC Dual Composite Ceramics

Laminated ZrB2–SiC Ceramic with Improved Strength and Toughness

Novel Ti3SiC2-(Ti, Zr)B2 Toughened (ti, Zr)C-based Composites with Enhanced Mechanical Properties Fabricated by Dual in Situ Reactions Hot-Pressing at Low Temperature

Design, Preparation, and Enhanced Mechanical Properties of Novel Plate-Like Grains Toughened (zr, Ti, W, Ta)C Medium-Entropy Ceramics Fabricated by In-Situ Reaction Hot-Pressing

Improved Fracture Toughness of Laminated ZrB2-SiC-MoSi2 Ceramics Using SiC Whisker

Toughness Mechanism of Layered ZrB2 Based Composite Ceramic

Toughened (ti0.2zr0.2hf0.2nb0.2ta 0.2)B2-Sic Composites Fabricated by One-Step Reactive Sintering with a Unique SiB6 Additive

Sintering Temperature Effect on Microstructure, Mechanical and Electrical Properties of Multi-Layered ZrB2-based Ceramics with Thin Ti Interlayer

Improved toughness of ZrB2–SiC composites with nanopowders obtained by mechanical alloying

Study on the toughening mechanism of in-situ synthesis (TixZr1−x)B2 in solid-state sintered SiC composite ceramics

Laminated ZrB2–SiC/graphite Ceramics with Simultaneously Improved Flexural Strength and Fracture Toughness

Integrated preparation of B4C–TiB2 multilayer graded ceramics with high hardness and high toughness

Efficient Multiscale Strategy for Toughening HfB2 Ceramics: A Heterogeneous Ceramic–metal Layered Architecture

Exceptional Strength-Toughness-hardness Integrated B4C Ceramics with Synergistic Reinforcement of Nano-Bn and In-Situ Ceramic Phases

Microstructure and Mechanical Properties of Laminated ZrB2–SiC Ceramics with ZrO2 Interface Layers

Design of a Double-Layer Composite Ceramic and Its Brazing with Niobium

Novel Α/β SiC-(Ti, Nb)B2 Toughened (ti, Nb)C-based Composites with Enhanced Mechanical Properties Fabricated by in Situ Reactions Sintering at Low Temperature

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite