Abstract:A modified ZSM-5 zeolite (denoted as ZSM-5-M), which was synthesized using tetrapropylammonium hydroxide (TPAOH) and cetyltrimethylammonium bromide (CTAB) as dual templates, and the commercial ZSM-5 zeolite (denoted as ZSM-5-C), have been used to prepare the corresponding CuZSM-5 (M & C) catalysts containing 3 wt% Cu by ion exchange method. Compared to CuZSM-5-C catalyst, the CuZSM-5-M catalyst demonstrated remarkably higher catalytic activity at low temperatures (<450 °C) for selective catalytic reduction of NOx with NH3 both in the simulated exhaust and engine bench testing. The modified synthesis by the dual template with the product aged for a long time at room temperature, leads to the formation of the ZSM-5-M zeolite with much higher specific surface area (608 m2 g−1) and higher total pore volume (0.8880 cm3 g−1) due to the presence of more mesoporous pores. The X-ray diffraction results showed that ZSM-5-M maintained its typical MFI structure, while its crystallinity (84.1%) was lower than that of the ZSM-5-C zeolite. The characterization results by H2 temperature-programmed reduction and X-ray photoelectron spectra revealed that the higher redox properties of isolated Cu2+ ions combined with the high-dispersion CuO crystallites and Cu+ ions are likely the main cause for the excellent low-temperature activity of the CuZSM-5-M catalysts. The isolated active Cu2+ species and high-dispersion CuO crystallites had a stronger interaction with other atoms in CuZSM-5-M catalysts. The results from thermogravimetric analysis, temperature-programmed desorption of ammonia and in situ diffuse reflectance infrared Fourier transform spectroscopy demonstrated that ZSM-5-M is a strong Bronsted acid site and the CuZSM-5-M catalyst had a relatively higher exchange rate of Cu2+ and Cu+ ions and more Lewis acidic sites, giving it a high NH3 adsorption capacity. The strong Bronsted acid site might be another cause that results in the higher NH3-SCR performance of the CuZSM-5-M catalyst.

Preparation and Characterization of Mesoporous CuO/ZSM-5 Catalysts for Automotive Exhaust Purification

Preparation and Characterization of Fe-containing Mesoporous HZSM-5 Catalysts for Automotive Exhaust Cleaning

Synthesis and evaluation of mesopore structured ZSM-5 and a CuZSM-5 catalyst for NH3-SCR reaction: Studies of simulated exhaust and engine bench testing

Selective Catalytic Reduction of Nitrogen Oxides from Exhaust of Lean Burn Engine over In-Situ Synthesized Cu-ZSM-5/cordierite.

Metal-Zsm-5/Cordierite Monolithic Catalysts for Purifying Lean-Burn Engine Exhaust

Evaluation of in-situ synthesized monolithic metal-MFI/cordierite catalysts to remove NO x from lean exhaust

Combination catalyst for the purification of automobile exhaust from lean-burn engine

Study on Metal-Mfi/cordierite As Promising Catalysts for Selective Catalytic Reduction of Nitric Oxide by Propane in Excess Oxygen

The Preparation Of Nano-Sized Cu-Zsm-5 Zeolite And Its Catalytic Performance

Catalytic Combustion of Methane over High Copper-Loading ZSM-5 Catalysts

Mesoporous Zirconia Supported CuO-Based Catalysts for Methane Catalytic Combustion

Synthesis and carbon monoxide purification performance of ZSM-5 molecular sieve Co-doped Mn/V catalytic material

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Ir/ZSM-5/cordierite Monolith for Catalytic NOx Reduction from Automobile Exhaust

Pd/Transition Metal Oxides Functionalized Zsm-5 Single Crystals with B-Axis Aligned Mesopores: Efficient and Long-Lived Catalysts for Benzene Combustion

CeO2-ZrO2-La2O3-Al2O3 Composite Oxide and Its Supported Palladium Catalyst for the Treatment of Exhaust of Natural Gas Engined Vehicles

Research progress on the preparation of transition metal-modified zeolite catalysts and their catalytic performance for the purification of engine exhausts

Cu/Fe-UZM-35 Catalysts for NOx Abatement in Diesel Vehicles for Next-Stage Emission Standards

Preparation, Characterization and Catalytic Behavior of Nanostructured Mesoporous CuO/Ce0.8Zr0.2O2 Catalysts for Low-Temperature CO Oxidation

Cu SSZ 13 molecular sieve based catalyst adopting core shell structure as well as preparation and application of catalyst

Unraveling the Boosting Low-Temperature Performance of Ordered Mesoporous Cu-SSZ-13 Catalyst for NOx Reduction