Abstract:Zeolites with a small pore structure are considered as the most efficient catalysts to satisfy the increasingly stringent emission requirement for diesel vehicles. Since the molecular size of NO is comparable to the pore size of small-pore zeolites, the formation of ammonium and sulphates during selective catalytic reduction of NOx with NH3, the limits of mass transportation become a major obstacle that reduces its catalytic performance. In this study, in order to overcome the diffusion limitation of traditional microporous Cu-SSZ-13 zeolite (Cu-SSZ-13-Trad), we successfully prepared a hierarchical Cu-SSZ-13 zeolite (Cu-SSZ-13-Meso) containing both small micropores and mesopores by adding carbon black as hard template. The experimental results exhibited that CuSSZ-13-Meso has high crystallinity like Cu-SSZ-13-Trad, and is rich in a large number of mesopores. Meanwhile, the hierarchical Cu-SSZ-13-Meso zeolite exhibited higher low-temperature activity (NOx conversion reached to 86% at 160 degrees C) than that of the traditional Cu-SSZ-13-Trad catalyst with micropores (NOx conversion was only 51% at 160 degrees C), which should be attributed to its hierarchical ordered porous structure enhancing the diffusion of the reactants and products and confirmed by the mass transportation calculation. Moreover, Cu-SSZ-13-Meso catalyst with mesopores also displayed superior hydrothermal stability, as well as water and sulfur resistance. Interestingly, the in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) results found that the Cu-SSZ-13-Meso with hierarchical structure was beneficial for the diffusion or decomposition of sulphate species at low reaction temperature and thereby increased its low-temperature activity even in the presence of SO2. This study also provides a guidance to design high-performance low-temperature active zeolite-based catalysts for the removal of NOx to solve the problem of cold-start diesel engines.

Cu SSZ 13 molecular sieve based catalyst adopting core shell structure as well as preparation and application of catalyst

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

Construction of multifunctional interface engineering on Cu-SSZ-13@Ce-MnOx/Mesoporous-silica catalyst for boosting activity, SO2 tolerance and hydrothermal stability

Toward rational design of a novel hierarchical porous Cu-SSZ-13 catalyst with boosted low-temperature NO reduction performance

Design and Synthesis of Core-Shell Structured Meso-Cu-ssz-13@mesoporous Aluminosilicate Catalyst for SCR of NOx with NH3: Enhancement of Activity, Hydrothermal Stability and Propene Poisoning Resistance

Toward Rational Design of a Novel Hierarchical Porous Cu-SSZ-13 Catalyst with Boosted Low-Temperature NOx Reduction Performance

Synthesis of Cu-SSZ-13 from Zeolite Analcime Derived from Solid Waste and Natural Minerals for Selective Catalytic Reduction of NO

Design of Bifunctional Cu-SSZ-13@Mn 2 Cu 1 Al 1 O x Core–Shell Catalyst with Superior Activity for the Simultaneous Removal of VOCs and NO x

Engineering CeZrOx-Cu/SSZ-13 coupled catalysts to synergistically enhance the low-temperature NH3-SCR activity

Unraveling the Boosting Low-Temperature Performance of Ordered Mesoporous Cu-SSZ-13 Catalyst for NOx Reduction

Environmental benign synthesis of Nano-SSZ-13 via FAU trans-crystallization: Enhanced NH3-SCR performance on Cu-SSZ-13 with nano-size effect

Hard Template-Assisted Trans-Crystallization Synthesis of Hierarchically Porous Cu-SSZ-13 with Enhanced NH3-SCR Performance

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

A comparison of Al-rich Cu-SSZ-13 zeolites synthesized by different methods in their Al distribution, hydrothermal stability and catalytic performance in the selective catalytic reduction of NOx with NH3

Preparation method of honeycomb carrier catalyst for molecular sieve denitration

Study on Metal-Mfi/cordierite As Promising Catalysts for Selective Catalytic Reduction of Nitric Oxide by Propane in Excess Oxygen

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Rapid synthesis and hydrothermal stability enhancement of Cu-SSZ-13 zeolites for nitrogen oxide removal

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Effects of Cu species in Cu-SSZ-13 zeolites on the performance of NO x reduction reactions

Synthesis of Cu-SSZ-13 Catalyst by Using Different Silica Sources for NO-SCR by NH3