Abstract:The current investigation involved the development of activated carbon, juglans regia activated carbon (JRACs), from walnut shells, scientifically known as Juglans regia . The ZnO nanorods were loaded on the activated carbon and referred to as ZnO@JRACs. Desulfurization efficiency was assessed through batch adsorption and compared to commercial activated carbon known as DARCO. The materials were characterized using PXRD (powder X-ray diffraction), FTIR (Fourier-transform infrared spectroscopy), ICP-AES (inductively coupled plasma atomic emission spectroscopy), BET (Brunauer–Emmett–Teller) surface area analysis, TEM (transmission electron microscopy) imaging, and TGA (thermal gravimetric analysis). The findings indicated that the materials have oxygen functionalities, a porous morphology, and a substantial specific surface area (BET) of 1269.92 m 2 /g for ZnO@JRACs. Zn atom concentration in the ZnO@JRACs surface was determined to be 1.16 atomic percent using ICP-AES. Desulfurization experiments were conducted on three liquid fuels, namely a single component model fuel, MSF (multicomponent simulated fuel), and commercial fuel (kerosene), under optimized conditions (8 g/L adsorbent dosage in 10 mL of fuel, 15 min of contact time at room temperature). The conditions effectively removed ~ 98.9% of dibenzothiophene (DBT) from the single component model fuel. The observed order for adsorption capacity is as follows: ZnO@JRACs (63.6 mg g −1 ) > JRACs (46.3 mg g −1 ) > DARCO (26.1 mg g −1 ). The analysis of multicomponent simulated fuel (MSF) using gas chromatography-flame photometric detector (GC-FPD) revealed significant removal percentages for different types of thiophenic sulfur. Specifically, the removal percentages were ~ 46.2%, 97.6%, and 99.4% for benzothiophene, dibenzothiophene, and 4, 6-dimethyldibenzothiophene, respectively. Kinetic studies have shown that the adsorption process is governed by a pseudo second-order reaction. Additional thermodynamic studies were conducted to further investigate the mechanism of adsorption. The spent synthesized composite ZnO@JRACs were thermally regenerated and can be reused for up to four cycles.

Ni/ZnO@ZSM-5 Reaction Adsorption Desulfurization Catalyst for Octane Number Improvement

Preparation of desulfurization adsorbent containing ZnO and study on its desulfurization performance

The Preparation of Ni/ZnO Adsorbent via a Low-Temperature Solid-State Method for Ultra-deep Desulfurization

Reactive Adsorption Desulfurization of Olefin-Containing Feedstocks over Ni/ZnO–Al2O3 Adsorbents: Effects of ZnO–Al2O3 Support Composition

Reactive Adsorption Desulfurization of Fluid Catalytic Cracking Gasoline: The Effect of Promoters (Fe, Mo, and W) on the Structural and Catalytic Properties of Ni/ZnO Adsorbents

Facile and controllable preparation of nanocrystalline ZSM-5 and Ag/ZSM-5 zeolite with enhanced performance of adsorptive desulfurization from fuel

Deep Adsorption Desulfurization of Fluid Catalytic Cracking Light Gasoline on NiO/ZnO-TiO2 Adsorbents with a High Breakthrough Sulfur Capacity

The Relation of Ni/ZnO Nano Structures With Properties of Reactive Adsorption Desulfurization

Reactive Adsorption Desulfurization Coupling Olefin Conversion in Fluid Catalytic Cracking Gasoline Upgrading Process

Synthesis of Ni-Modified ZSM-5 Zeolites and Their Catalytic Performance in n-Octane Hydroconversion

Desulfurization of simulated and commercial liquid fuel on nano-ZnO fabricated walnut shells

The role of ZnO in reactive desulfurization of diesel over ZnO@Zeolite Y: Classification, preparation, and evaluation

High-Performance Strategy and Degradation Mechanism of Cezrvox Catalysts for Nox Reduction

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

New insights into the mechanism of reactive adsorption desulfurization on Ni/ZnO catalysts: Theoretical evidence showing the existence of interfacial sulfur transfer pathway and the essential role of hydrogen

Preparation and Characterization of Mesoporous CuO/ZSM-5 Catalysts for Automotive Exhaust Purification

Robust interaction of ZnO and TiO2 nanoparticles with layered graphitic carbon nitride for enhanced photocatalytic oxidative desulfurization of fuel oil: mechanism, performance and stability

Synthesis of Ni( ii )-phosphotungstic acid/nanocrystalline HZSM-5 catalyst for ultra clean gasoline in a single-stage reactor

Enhancement of NOx adsorption performance on zeolite via a facile modification strategy

Experimental, isotherm, kinetic and thermodynamic studies of the novel modified zeolite ZSM-5 adsorbent for use in clean fuel processing

Facile synthesis of ultrafine nanosized ZSM-5 zeolite using a hydroxyl radical initiator for enhanced catalytic performance in the MTG reaction