Abstract:A series of Ni/ZnO adsorbents containing promoters (Fe, Mo, and W) were prepared for reducing the loss of the octane number because of olefin saturation during the reactive adsorption desulfurization (RADS) process. The bimetallic adsorbents synthesized by a two-step impregnation method were analyzed by a series of characterization methods to evaluate the effect of additional metal on the structural and catalytic properties of the traditional Ni/ZnO adsorbent. Hydrogen temperature-programmed reduction (H2-TPR) results showed that the addition of promoter Fe enhanced the reduction performance of NiO, while W hindered the reduction of NiO. The electron density of Ni was modified following the introduction of Fe and W, as analyzed by X-ray photoelectron spectroscopy (XPS), which weakened the adsorption of π complexation between olefins and Ni. Experimental results showed that the desulfurization performance of Ni–Mo was improved but aggravated the loss of the octane number. Ni–W effectively attenuated the olefin saturation reaction but seriously shortened the breakthrough time. The adsorbent modified by Fe can reduce the saturation reaction of olefins and improve the desulfurization performance. In addition, multicycle regeneration experiments proved the excellent regeneration performance of the adsorbent modified by an appropriate amount of Fe. Therefore, the Ni–Fe bimetallic adsorbent may become a novel adsorbent for reactive adsorption desulfurization, which achieves high desulfurization activity and olefin retention ability to satisfy the requirements of fluid catalytic cracking (FCC) gasoline refining.

Preparation of desulfurization adsorbent containing ZnO and study on its desulfurization performance

The desulfurization properties and mechanism of Ni2+ modified zeolites for desulfurization of model diesel

The Desulfurization Properties and Mechanism of Ni~(2+) Modified Zeolites for Desulfurization of Model Diesel

Ultra Deep Adsorptive Desulfurization of Solvent Oils by Ni/ZnO Adsorbent

Effect of different preparation methods of nickel-based non-hydrodesulfurization adsorbent on desulfurization

Deep Adsorption Desulfurization of Fluid Catalytic Cracking Light Gasoline on NiO/ZnO-TiO2 Adsorbents with a High Breakthrough Sulfur Capacity

Ultra-deep Desulfurization Via Reactive Adsorption on Ni/ZnO: the Effect of ZnO Particle Size on the Adsorption Performance

Ni/ZnO@ZSM-5 Reaction Adsorption Desulfurization Catalyst for Octane Number Improvement

Adsorptive removal of thiophene over nickel-based ZnO with different supports

The Preparation of Ni/ZnO Adsorbent via a Low-Temperature Solid-State Method for Ultra-deep Desulfurization

Reactive Adsorption Desulfurization of Olefin-Containing Feedstocks over Ni/ZnO–Al2O3 Adsorbents: Effects of ZnO–Al2O3 Support Composition

Preparation of NiWO4/g-C3 N4 and its ultra-deep desulfurization properties in ionic liquid

Preparation of NiWO4 Catalyst and Its Application in the Oxidation Desulfurization of Model Oil

Effect of Mixed Oxide Support for Ni/Zno in Reactive Adsorption Desulfurization

Ultra-deep Desulfurization Via Reactive Adsorption on Nickel and Zinc Species Supported on Activated Carbon

Study on Reactive Adsorption Desulfurization of Model Gasoline on Ni/Zno-Hy Adsorbent

The role of ZnO in reactive desulfurization of diesel over ZnO@Zeolite Y: Classification, preparation, and evaluation

Ni/Zno-Based Adsorbents Supported on Al2o3, Sio2, Tio2, Zro2: A Comparison for Desulfurization of Model Gasoline by Reactive Adsorption

Reactive Adsorption Desulfurization of Fluid Catalytic Cracking Gasoline: The Effect of Promoters (Fe, Mo, and W) on the Structural and Catalytic Properties of Ni/ZnO Adsorbents

Preparation of MoO3/g-C3N4 catalyst and its application in the oxidation desulfurization of model oil

Research on Reactive Adsorption Desulfurization over Metal Oxides Adsorbent