Deep Adsorption Desulfurization of Fluid Catalytic Cracking Light Gasoline on NiO/ZnO-TiO2 Adsorbents with a High Breakthrough Sulfur Capacity

Guanglin Zhou,Sheng Chen,Weili Jiang,Qin Li,Hongjun Zhou,Xuecheng Gong,Xiance Zhang

DOI: https://doi.org/10.1021/acsomega.1c06645

IF: 4.1

2022-03-27

ACS Omega

Abstract:Two kinds of NiO/ZnO-TiO2 adsorbents were prepared by equal volume impregnation (NiO/ZnO-TiO2-1) and kneading (NiO/ZnO-TiO2-2) methods. The adsorbents were characterized by X-ray diffraction, mercury intrusion porosimetry, scanning electron microscopy, energy dispersive X-ray spectroscopy, H2 temperature-programmed reduction, and H2 temperature-programmed desorption. It was found that NiO/ZnO-TiO2-2 had a smaller average pore diameter and a larger specific surface area as well as a more uniform distribution of the nickel element. Additionally, more Ni0 active sites together with a stronger interaction between the active component and the support were detected on the surface of NiO/ZnO-TiO2-2, which was beneficial to the inhibition of olefin saturation during desulfurization. The desulfurization performance of the adsorbents was investigated in a fixed bed reactor with fluid catalytic cracking light gasoline as a feed oil. The evaluation results confirmed NiO/ZnO-TiO2-2 with a better desulfurization performance with less olefin saturation. It could reduce the total sulfur content from 300 ppmw to less than 5 ppmw, and the breakthrough time and breakthrough sulfur capacity were 91 h and 6.71% (67.1 mg S/g adsorbent), respectively.