Abstract:Nanostructure reinforced nitride ceramics play an important role in the family of structural ceramics. In this study, large scale of one-dimensional (1D) beta-sialon nanostructures and beta-sialon-beta-Si3N4 composite powders were synthesized simultaneously via a reduction nitridation process by using powders of silicon, aluminum, and silica as raw materials. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM/HRTEM), Fourier-transform infrared spectroscopy (FT-IR) and energy dispersive x-ray spectroscopy (EDS) were used to characterize the phase composition, morphology, and microstructure of the as-obtained products. As a result, large scale of 1D beta-sialon nanostructures can be prepared at 1600 degrees C. The diameter of the as-prepared nanowires in the range of 80 to 170 nm can be tailored by the addition of aluminum. The growth of 1D beta-sialon nanostructures is achieved by a vapor-solid (VS) mechanism. Photoluminescence (PL) of the 1D beta-sialon nanostructures was characterized which exhibit violet/blue emission peaks, making it have the potential to be applied in optoelectronic nanodevices. Besides, nitride ceramic composite powders including beta-Si3N4 and beta-sialon with in situ formed beta-sialon nanowires were also achieved. The phase transformation behavior and the thermodynamical analysis of the ceramic composite powders were also studied by characterizing the phase composition of the products synthesized at different temperature. The as-grown beta-sialon nanowires and the composite powders have great potential to be applied in nanostructure reinforced structural ceramics.

Effect of Secondary Phases' Structure on the Dielectric Properties of Β-Sialon

Formation of an α-SiAlON Layer on ß-SiAlON and Its Effect on Mechanical Properties

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Effect of Porosity on the Structure and Properties of Β-Sialon Ceramics

Effect of α/β phase ratio on microstructure and mechanical properties of silicon nitride ceramics

Effect of Initial Phase Composition on the Phase Composition, Microstructure, and Mechanical Properties of Si3N4 Ceramics

Influence of Processing and Microstructure on Mechanical Properties in Sialon-Based Ceramics

Process and mechanical properties of beta ' Sialon reaction bonded SiC

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Synthesis of single phase β-SiAlON ceramics by reaction-bonded sintering using Si and Al2O3 as raw materials

Microstructure Characteristics And High-Temperature Performance Of In-Situ Reinforced Alpha-Sialon Ceramics

New Insight on the Effect of Yttria-Based Secondary Phases on Sintering and Electrical Behavior of Aluminum Nitride Ceramics

Study on Phase Transformation and Microstructure Development of Yb Α-Sialon Ceramics Prepared by Pressureless Sintering

Microstructure And Mechanical Properties Of The Alpha-Sialon/Alpha-Sic Composites: Effects Of Heat Treatment

Mechanical Properties And Thermal Shock Resistance Of Refractory Self-Reinforced Alpha-Sialons Using Barium Aluminosilicate As An Additive

Effects Of Different Additives On Densification And Alpha-Beta Phase Transformation In Si3n4 Ceramics

Effects Of Technical Parameters On The Phase Composition And Microstructure Of Yb Alpha-Sialon Prepared By Combustion Synthesis

Growth mechanism and synchronous synthesis of 1D beta-sialon nanostructures and beta-sialon-Si3N4 composite powders by a process of reduction nitridation

Influence of Hot Pressing Sintering Temperature on Beta-Sialon-15r Ceramics Synthesized from Aluminum Dross

Influence of Stabilizing Ions and Sintering Process on the Thermal Conductivity of Α‐sialon Ceramics

Secondary crystalline phases and mechanical properties of heat-treated Si3N4