Abstract:In this paper, a porous Sialon polytypoid material with multilayered structure was in situ synthesized at 1700 degrees C for 3 h in a nitrogen atmosphere via a nitriding process. The plate-like Sialon grains were observed using a scanning electron microscope (SEM), and the chemical composition, structure, chemical state and optical absorption of this material were characterized by energy dispersive X-ray spectroscopy (EDX), synchrotron X-ray diffraction (SXRD), X-ray photoelectron spectroscopy (XPS), and UV-vis diffuse reflectance spectroscopy (DRS). There are four layers with two ranges of grain sizes. The grains with sizes of 18-35 mu m are in the inner layer (layer-4) and light-grey, while those grains with bigger sizes of 60-80 mu m are present in the outer layers in green colour. These two types of grains have a slight difference in chemical composition, i.e. (La, Sm)(0.1)Si8Al14O5N21.1 and (La, Sm)(0.33)Si6Al12O1N21, respectively. They are polytypoids with different structures, which precipitated from the lanthanide-rich Sialon glass. The chemical states of the elements were different as indicated from XPS data. It is believed that the colour and size differences within layers resulted from the intrinsic differences of chemical composition, structure and chemical state of the two types of grains. This porous ceramic might be of potential applications in water treatment, building and automotive industries as a functionally gradient material (FGM) or ceramic filter.

Effect of Porosity on the Structure and Properties of Β-Sialon Ceramics

Effects of Solid Content on the Phase Assemblages, Mechanical and Dielectric Properties of Porous Α-Sialon Ceramics Fabricated by Freeze Casting

Microstructure and Mechanical Properties of SiAlON Ceramics with Porous Structure

Cost-effective Fabrication of Porous Α-Sialon Bonded Β-Sialon Ceramics

Synthesis and Properties of Porous Single-Phase β′-SiAlON Ceramics

Effect of Secondary Phases' Structure on the Dielectric Properties of Β-Sialon

Porous Β-Sialon Ceramic with Closed Packed Macropore

Synthesis and properties of porous single-phase beta '-SiAlON ceramics

Porous silicon nitride and SiAlON ceramics: Fabrication and characterization

Preparation of porous β-SiAlON ceramics using corn starch as pore-forming agent

A Novel Method to Fabricate Porous Single Phase O’-sialon Ceramic and Improve Its Mechanical Property

Influence of Processing and Microstructure on Mechanical Properties in Sialon-Based Ceramics

Effects of Sintering Additive and Β-Si3n4 Phase Contents on the Properties of Porous Si3N4 Ceramics

Effect of Sintering Additives on Microstructure and Mechanical Properties of Porous Silicon Nitride Ceramics

Fabrication And Properties Of Porous Si3n4-Sio2 Ceramics With Dense Surface And Gradient Pore Distribution

Enhanced thermal insulation and mechanical properties of Y-α-SiAlON porous ceramics with Sr doping

Pore Architectures And Mechanical Properties Of Porous -Sialon Ceramics Fabricated Via Unidirectional Freeze Casting Based On Camphene-Templating

A porous (La, Sm) co-doped Sialon-polytypoid ceramic with colour and structure differences in multilayers

POROUS Β-Sialon/si3n4 CERAMICS PREPARED BY REACTIVE SINTERING

Mechanical, dielectric and thermal properties of porous boron nitride/silicon oxynitride ceramic composites prepared by pressureless sintering

Effect of Different Rare-Earth on Microstructure and Properties of alpha-Sialon Ceramics