Abstract:Sb2S3 is a promising environmentally‐friendly semiconductor for stable and high efficiency thin film solar cells, but, like many other polycrystalline materials, is limited by non‐radiative recombination and carrier scattering by grain boundaries. Herein, we show how the grain boundary density in Sb2S3 films can be significantly reduced from 1068±40 nm μm−2 (largest grain ∼5 μm) to 327±23 nm μm−2 (largest grain >15 μm) by incorporating an appropriate amount of Ce3+ into the precursor solution for Sb2S3 deposition. Through extensive characterization of the structural, morphological and optoelectronic properties, complemented with computations, we reveal the underlying mechanisms responsible for the increased grain size and improved photovoltaic performance of Sb2S3 solar cells. A critical factor behind the reduction in grain boundary density is the formation of an ultrathin layer of Ce2S3 at the CdS/Sb2S3 interface, which could reduce the interfacial energy and increase the adhesion work between Sb2S3 and the substrate to encourage heterogeneous nucleation of Sb2S3, as well as increase the rate of grain growth. Through a reduction in non‐radiative recombination at grain boundaries and/or the CdS/Sb2S3 heterointerface as well as improved charge‐carrier transport properties at the heterojunction, we achieved high performance Sb2S3 solar cells with a power conversion efficiency reaching 7.66%, and an open‐circuit voltage (VOC) of 796 mV. This VOC is the highest reported thus far for Sb2S3 solar cells. This work provides a strategy to simultaneously regulate the nucleation and growth of Sb2S3 absorber films via in‐situ chemical environment tuning, which can be more broadly applied to other thin film systems to improve their photovoltaic performance. This article is protected by copyright. All rights reserved

Enhanced Electrical Conductivity of Sb2S3 Thin Film Via C60 Modification and Improvement in Solar Cell Efficiency.

Composition Engineering of Sb2S3 Film Enabling High Performance Solar Cells

Grain Engineering of Sb2S3 Thin Films to Enable Efficient Planar Solar Cells with High Open‐Circuit Voltage

n-Type Doping of Sb2S3 Light-Harvesting Films Enabling High-Efficiency Planar Heterojunction Solar Cells.

Effective Additive for Enhancing the Performance of Sb2S3 Planar Thin Film Solar Cells

Surface Treatment Processed Electron Transport Layers for Efficient Sb2S3 Solar Cells

Antimony incorporated flexible Cu 2 ZnSn(S,Se) 4 solar cell for enhanced mechanical endurance and efficiency

Oxygen‐Assisted Tailoring of Evaporated PbS Hole Transport Layer for Highly Efficient Antimony Sulfide Solar Cells

Stable and Efficient CdS/Sb2Se3 Solar Cells Prepared by Scalable Close Space Sublimation

Microstructural and Optical Properties of Sb2S3 Film Thermally Evaporated from Antimony Pentasulfide and Efficient Planar Solar Cells

Self‐Regulated Growth of Large‐Grain Sb2S3 Thin Films for High‐Efficiency Solar Cells

Achievable efficiency improvement of Sb2Se3 thin-film solar cells through interface engineering

Fabrication of Sb2S3 thin films by sputtering and post-annealing for solar cells

Sputtered and Selenized Sb2Se3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 Mv

A Novel Multi-Sulfur Source Collaborative Chemical Bath Deposition Technology Enables 8%-Efficiency Sb2 S3 Planar Solar Cells.

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb <sub>2</sub> (S,Se) <sub>3</sub> Solar Cells with 10.7% Efficiency

Enhanced Performance of the Sb2Se3 Thin-Film Solar Cell by Organic Molecule-Induced Crystallization and Suppression of the Interface Recombination

Enhanced Photovoltaic Properties in Sb2S3 Planar Heterojunction Solar Cell with a Fast Selenylation Approach

Confined‐Space Selenium‐Assisted Tellurization Posttreatment Strategy for Efficient Full‐Inorganic Sb2S3 Thin‐Film Solar Cells

Modulation of Energy Band Positions in Sb2S3 Thin Films for Enhanced Photovoltaic Performance of FTO/TiO2/Sb2S3/P3HT/Au Solar Cell

Interfacial Engineering Towards Enhanced Photovoltaic Performance of Sb2Se3 Solar Cell