Abstract:The focus of this study was the development of a second generation of fiber lasers internally cooled by anti-Stokes fluorescence. The laser consisted of a length of a single-mode fiber spliced to fiber Bragg gratings to form the optical resonator. The fiber was single-moded at the pump (1040 nm) and signal (1064 nm) wavelengths. Its core was heavily doped with Yb, in the initial form of CaF 2 nanoparticles, and co-doped with Al to reduce quenching and improve the cooling efficiency. After optimizing the fiber length (4.1 m) and output-coupler reflectivity (3.3%), the fiber laser exhibited a threshold of 160 mW, an optical efficiency of 56.8%, and a radiation-balanced output power (no net heat generation) of 192 mW. On all three metrics, this performance is significantly better than the only previously reported radiation-balanced fiber laser, which is even more meaningful given that the small size of the single-mode fiber core (7.8-µm diameter). At the maximum output power (∼2 W), the average fiber temperature was still barely above room temperature (428 mK). This work demonstrates that with anti-Stokes pumping, it is possible to induce significant gain and energy storage in a small-core Yb-doped fiber while keeping the fiber cool.

110 Mw Single-Frequency Yb:YAG Crystal-Derived Silica Fiber Laser at 1064 Nm.

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Efficient single-frequency Tm:YAG crystal-derived silica fiber laser at 1.7 μm

High-power, high-efficiency single-frequency DBR fiber laser at 1064 nm based on Yb3+-doped silica fiber

Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Over 100 mW linearly polarized single-frequency fiber laser based on Er:YAG crystal-derived silica fiber

Single-frequency fiber laser of 315 mW at 1940 nm based on a Tm : YAG/Ho : YAG-co-derived silica fiber

Multi‐component yttrium aluminosilicate ( YAS ) fiber prepared by melt‐in‐tube method for stable single‐frequency laser

Yttrium Aluminosilicate (YAS) Fiber with Heavily Doped of Nd for Single Frequency Laser

Growth and Characterization of Yb:Ho:YAG Single Crystal Fiber

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

400 Mw Ultrashort Cavity Low-Noise Single-Frequency Yb^3+-doped Phosphate Fiber Laser

Yb-doped Fiber Laser Frequency Comb on Silica in 1 GHz Line Spacing

Paving way for fabrication of silica-based single -frequency seed laser: Ultrahighly Yb-doped optical fibers via sol-gel method combined with silica tube inner wall coating and fusion-tapering technique

Yb-Doped Aluminophosphosilicate Laser Fiber

High-Efficiency Radiation-Balanced Yb-Doped Silica Fiber Laser With 200-mW Output

400 mW ultrashort cavity low-noise single-frequency Yb³⁺-doped phosphate fiber laser.

56-fs diode-pumped SESAM mode-locked Yb:YAl3(BO3)4 laser

High ytterbium concentration Yb/Al/P/Ce co-doped silica fiber for 1-μm ultra-short cavity fiber laser application

High-power CW 1048 nm Yb:YAG Dual-Ended Diode-pumped zigzag slab Laser