Abstract:Adjustable ring-mode laser welding (ARM) provides a new solution for the pore defects of aluminum alloy joints. However, the inhibition mechanism of ARM for porosity defects in the aluminum alloy welds with medium-thickness is still lacking. In this work, the dynamic behavior of the keyhole/molten pool and the formation/transport process of bubbles during adjustable ring-mode laser welding of medium-thick aluminum alloy are investigated by experiments and simulations. The results display that the laser power ratio of central-ring beam of 6:4, the porosity is 4.19 ± 2.32 %, which is reduced by 52.2 % compared with the weld by single laser welding (SLW) of the same penetration depth. The addition of ring beam helps to enlarge the tilt angle of the keyhole rear wall, which increases the ability of the keyhole wall to resist the impact of the molten pool. Besides, it also lowers the radial pressure gradient and the local variation of the keyhole wall. These reasons reduce the formation of pores. Furthermore, the main eddy current direction of the molten pool changes less frequently, and the melt flow velocity impacting the keyhole wall only changes in the range of 0–0.5 m/s (SLW: 0.25–0.75 m/s). This diminishes the fluid dynamic pressure which is the primary driving force of the bubbles. The velocity of the bubble moving away from the bottom of the keyhole is decreased and it is more likely to remelt the keyhole and escape under the action of the laser beam at the next moment. This work provides engineering application and theoretical reference value for the suppression of pore defects in laser welding of aluminum alloy in medium-thick plates.

Role of Welding Speed on Keyhole-Induced Porosity Formation Based on Experimental and Numerical Study in Fiber Laser Welding of Al Alloy

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

Effect of plate thickness on weld pool dynamics and keyhole-induced porosity formation in laser welding of Al alloy

Numerical study of keyhole dynamics and porosity formation during high‐power oscillating laser welding of medium‐thick aluminum alloy plates

Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling During Deep-Penetration Laser Welding

Simulation of the Effect of Keyhole Instability on Porosity during the Deep Penetration Laser Welding Process

Study on the influence of Al-Si welding wire on porosity sensitivity in laser welding and process optimization

Influence mechanism of the keyhole behavior on penetration depth by in-situ monitoring in pulsed laser welding of aluminum alloy

Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation

Investigation of the Inhibition Mechanism of Process Porosity in Laser-MIG Hybrid-Welded Joints for an Aluminum Alloy

Numerical Simulation on Porosity Formation and Suppression in Oscillation Laser Welding of Ti-6Al-4V Alloy

Investigation on the keyhole/molten pool dynamic behavior during adjustable ring-mode laser welding of medium-thick aluminum alloy

Understanding the Effect of Oxygen on Weld Pool and Keyhole in Laser Beam Welding

Fluid Flow Characteristics and Porosity Behavior in Full Penetration Laser Welding of a Titanium Alloy

Enhanced Penetration Depth during Reduced Pressure Keyhole-Mode Laser Welding

Research on keyhole-induced porosity and melt flow kinetic behavior of 2219 alloy T-joint manufactured by dual laser-beam bilateral synchronous welding

Porosity inhibition of aluminum alloy by power-modulated laser welding and mechanism analysis

Porosity morphology and its evolution mechanism in laser mirror welding of 2219 aluminum alloy

Numerical and experimental study of thermal fluid flow and keyhole dynamic in laser welding of aluminum alloy assisted by electromagnetic field