Abstract:<p>Herein, Ti(C,N)-based cermets prepared via mechanical activation and subsequent in situ carbothermal reduction was studied. The correlation between microstructural and mechanical performance of these cermets was investigated by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Results indicated that with the increase in tungsten carbide (WC) content, hard particles of ceramic gradually evolved from complete solid solution to partial solid solution with a little quantity of core–rim structure. Mean particle size of the cermet first increased, and then, slightly decreased. In addition, grain shape gradually changed from relatively faceted to nearly round. Initially, with the increase in WC content, the increase in transverse rupture strength (TRS) and slight increase in hardness were related to the strengthening of both solid solution and fine grains. However, with further addition of WC, the decrease in hardness was primarily because of lower hardness of (Ti,W,Mo) (C,N) phase with higher W content. Extremely high toughness of cermets with WC content of 0 and 3 wt% was mainly due to the decrease in interface area compared to traditional cermets, which resulted in significant reduction in interfacial strain between the rim and core. Moreover, toughness improvement of cermets containing 6 to 12 wt% of WC was due to comprehensive effect of superb coherent relationship of black core/grey rim particles, semi-coherent relationship with high-density dislocations of solid-solution particles, and solid-solution strengthening of white core-grey rim particles.</p>

Effect of ZrO2 Whiskers on the Microstructure and Mechanical Properties of a Ti(C,N)‐based Cermet Cutting Tool Material

Properties of Ti(C,N)-based cermets reinforced with ZrO2 whiskers deposited via sulfate flux at high temperatures

Effect of SiC Nano-Whisker Addition on TiCN-based Cermets Prepared by Spark Plasma Sintering

Ticn-Based Cermets Strengthened with Sic Nano-Whiskers by Spark Plasma Sintering

Addition Effect of ZrC Nano-powder on the Microstructure and Mechanical Properties of TiCN-based Cermets Prepared by Spark Plasma Sintering

Correlation between microstructure and mechanical properties of Ti(C,N)-xWC-Ni cermets prepared by mechanical activation and subsequent in situ carbothermal reduction

Effect of Si3N4 Additive on Microstructure and Mechanical Properties of Ti(C,N)-Based Cermet Cutting Tools

Fabrication, microstructure evolution, and mechanical properties of Ti(C,N)-HfN-WC-Ni-Mo cermets

Achieving hardness‐strength‐toughness synergy in (Ti, W, Mo, Cr)(C, N)‐based cermets

Preparation and properties of Ti(C,N)-based cermets with graphene nanosheet addition by spark plasma sintering

Effects of the addition of multi-walled carbon nanotubes on the microstructure and properties of Ti(C,N)-based cermets prepared by spark plasma sintering

Addition of Nano CaF2@SiO2 and SiC Whiskers in Ceramic Tools for Wear Reduction and Improved Machinability

Microstructure, mechanical property and cutting performance of (Ti,W)C/Mo/Co/Ni cermet tool material prepared by spark plasma sintering and high frequency induction heating

Synergistic Toughening Effect of SiC Whiskers and Particles in ZrO2–Al2O3–SiC Ceramics

Submicron Ti(C,N)-based cermets with improved microstructure using high-energy milled and subsequent heat-treated ultrafine Ti(C,N) powders

Effect of diamond addition on microstructure and mechanical properties of Ti(C,N)-based cermets

Preparation and Mechanical Properties of SiC Whisker and Nanosized Mullite Particulate Reinforced TZP Composites

Effect of Y2O3 Addition on the Microstructure and Mechanical Properties of TiCN-based Cermets

Strengthening and toughening of Ti(C,N)-based cermets: (Ti,W)C additive design and the mechanism

Development of Whisker Toughening Ceramic Cutting Tool Composite by In Situ Synthesis Technology

Design and synthesis of an Al 2 O 3 fiber strengthening (Ti,W)C sandwich cermet tool by spark plasma sintering