Abstract:Gasping the controlling mechanism of multi-core-rim structure, like the ratio of multi-cores and the rim thickness, is a key to develop Ti(C, N)-based cermets with high performances. In this work, three types of cermets with the same nominal composition were fabricated by doping self-made (Ti, W, Ta) (C, N) pre-solid solution powders with different compositions, (Ti, 61.3 W, 8.6Ta) (C, N), (Ti, 53.3 W, 7.5Ta) (C, N) and (Ti, 47.1 W, 6.6Ta) (C, N). Effect of the composition of (Ti, W, Ta) (C, N) pre-solid solutions on the multi-core-rim microstructure and mechanical properties of cermets was investigated. Results showed that the decrease of W and Ta contents in the pre-solid solutions leads to an increase of white cores with thinner rims and a decrease of black cores with thicker rims. Thermodynamic calculations indicated that the decrease of W and Ta contents strengthens the thermal stability of the pre-solid solutions. With the decrease of the thermal stability difference between black core Ti(C, N) and white core (Ti, W, Ta) (C, N), more rimless black particles are reserved via Ostwald ripening process. The rim thickness and core size were statistically analyzed, which indicates that the cermet doping medium-solid-solution (Ti, 53.3 W, 7.5Ta) (C, N) exhibits smallest ceramic grains with thinnest rims. An optimal comprehensive mechanical performance was obtained in the cermet doping (Ti, 53.3 W, 7.5Ta) (C, N). It implies that an appropriate pre-solid solution of W and Ta in (Ti, W, Ta) (C, N) promises fine multi-core-rim structure and thus sound mechanical properties of Ti(C, N)-based cermets can be obtained under the same condition of alloy composition and processing parameters.

Effect of diamond addition on microstructure and mechanical properties of Ti(C,N)-based cermets

Influence of TaC content on microstructure and mechanical performance of Ti(C,N)-based cermets fabricated by mechanical activation and subsequent in situ carbothermal reduction

Correlation between microstructure and mechanical properties of Ti(C,N)-xWC-Ni cermets prepared by mechanical activation and subsequent in situ carbothermal reduction

Preparation and properties of Ti(C,N)-based cermets with graphene nanosheet addition by spark plasma sintering

Improvement of microstructure, mechanical properties and cutting performance of Ti(C,N)-based cermets by ultrafine La2O3 additions

Fabrication, microstructure evolution, and mechanical properties of Ti(C,N)-HfN-WC-Ni-Mo cermets

Effects of the addition of multi-walled carbon nanotubes on the microstructure and properties of Ti(C,N)-based cermets prepared by spark plasma sintering

Effect of Y2O3 Addition on the Microstructure and Mechanical Properties of TiCN-based Cermets

Microstructure and properties of Ti(C, N)-based cermet with multi-core-rim microstructure: effect of (Ti, W, Ta) (C, N) pre-solid solution composition

Microstructure and Properties of Ti(C,N)-Based Cermets with AlxCoCrFeNiTi Binder

Effect of Cr2C3 addition on microstructure and mechanical properties of Ti(CN)-based cermets

Addition Effect of ZrC Nano-powder on the Microstructure and Mechanical Properties of TiCN-based Cermets Prepared by Spark Plasma Sintering

Influence of Mo addition on microstructure and mechanical properties of Ti(C,N)-based cermets fabricated by in-situ carbothermal reduction of TiO2

Effects of CrMnFeCoNi additions on microstructure, mechanical properties and wear resistance of Ti(C,N)-based cermets

Evolution of microstructure and interfacial characteristics of complete solid-solution Ti(C,N)-based cermets fabricated by mechanical activation and subsequent in situ carbothermal reduction

Effect of Si3N4 Additive on Microstructure and Mechanical Properties of Ti(C,N)-Based Cermet Cutting Tools

Effect of Cr<sub>2</sub>C<sub>3</sub> Addition on Microstructure and Mechanical Properties of Ti(CN)-Based Cermets

Tuning microstructure for superb mechanical properties in a Ti(C,N)-(WMoTaNbTi)C-Ni/Co cermets via change sintering temperature

Submicron Ti(C,N)-based cermets with improved microstructure using high-energy milled and subsequent heat-treated ultrafine Ti(C,N) powders

Effect of SiC Nano-Whisker Addition on TiCN-based Cermets Prepared by Spark Plasma Sintering

Effect of Nano-Si3n4 Addition on the Microstructure and Mechanical Properties of Ticn-Based Cermets