Effect of Si3N4 Additive on Microstructure and Mechanical Properties of Ti(C,N)-Based Cermet Cutting Tools

Ali Elgazzar,Sheng-Jian Zhou,Jia-Hu Ouyang,Zi-Jian Peng,Jun-Teng Yao,Zhan-Guo Liu,Yu-Jin Wang,Ya-Ming Wang

DOI: https://doi.org/10.3390/ma17112586

IF: 3.4

2024-05-28

Materials

Abstract:Development of high-performance cutting tool materials is one of the critical parameters enhancing the surface finishing of high-speed machined products. Ti(C,N)-based cermets reinforced with and without different contents of silicon nitride were designed and evaluated to satisfy the requirements. In fact, the effect of silicon nitride addition to Ti(C,N)-based cermet remains unclear. The purpose of this study is to investigate the influence of Si3N4 additive on microstructure, mechanical properties, and thermal stability of Ti(C,N)-based cermet cutting tools. In the present work, α-Si3N4 "grade SN-E10" was utilized with various fractions up to 6 wt.% in the designed cermets. A two-step reactive sintering process under vacuum was carried out for the green compact of Ti(C,N)-based cermet samples. The samples with 4 wt.% Si3N4 have an apparent solid density of about 6.75 g/cm3 (relative density of about 98 %); however, the cermet samples with 2 wt.% Si3N4 exhibit a superior fracture toughness of 10.82 MPa.m1/2 and a traverse rupture strength of 1425.8 MPa. With an increase in the contents of Si3N4, the Vickers hardness and fracture toughness of Ti(C,N)-based cermets have an inverse behavior trend. The influence of Si3N4 addition on thermal stability is clarified to better understand the relationship between thermal stability and mechanical properties of Ti(C,N)-based cermets.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to study the influence of silicon nitride (Si\(_3\)N\(_4\)) additives on the microstructure, mechanical properties and thermal stability of Ti(C,N) - based cermet cutting tools. Specifically, by adding different amounts of Si\(_3\)N\(_4\) to the Ti(C,N) - based cermet, the researchers aim to explore how these additives affect the density, hardness, fracture toughness, flexural strength and thermal stability of the material. The ultimate goal of the study is to optimize the performance of Ti(C,N) - based cermet so that it exhibits better heat resistance and mechanical properties in high - speed cutting, thereby increasing the service life and processing efficiency of cutting tools.