Abstract:An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li–Etsion–Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

Investigation of the Static Electrical Contact Behaviors of Rod and Spring for Micro-electromechanical-relay

Realization of a Test Tool for Diagnosis of Contact Resistance and Measurement of Selected Types of Conductive Materials

Experiment and simulation study of instability of a novel electrostatic MEMS relay

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Study on Electromagnetic Force of the New Micro Digital Valve

Characterization of the Micro Contact Resistance using a Novel On-Chip Apparatus

Design and Fabrication of a Novel MEMS Relay with Low Actuation Voltage.

Investigation on Effect of Fillets on the Characteristics of Relay Electrical Contacts

Research on the Characteristic of the Electrical Contact Resistance of Strap Contacts Used in High Voltage Bushings

Research on Eccentricity Performance of Capacitance Rod Position Measurement Sensor for Measuring Non-Metallic Rod

Research on Eccentricity Performance of Winding Wire Capacitance Rod Position Measurement Sensor

Characterisation of surface morphology of high voltage DC relay contacts under arc erosion

Analysis of Crucial Factors Affecting Contact Force of PCB Spring Terminals Based on Simulation and Rank Correlation

Improved Test Fixture for Collecting Microcontact Performance and Reliability Data

Experimental Study on Nanosized Contact Point

Study on Static Characteristics of Array Electrode Capacitance Control Rod Position Measurement Sensor

Research on Electrical Contact Characteristics of Brush-Rail Device With Transient Large Current

Characterization of the Resistance and Force of a Carbon Nanotube/Metal Side Contact by Nanomanipulation

Interfacial adhesion between electrical contacts determined by surface quality

Research on Static Characteristics of High Precision Capacitance Rod Position Measurement Sensor

Intermittent Failure Mechanism and Stabilization of Microscale Electrical Contact