Abstract:For microelectronic industry, Cu-based substrate and epoxy molding compound (EMC) interface is inherently weak and most likely to delaminate, well-known as a major threat for integrated circuits (ICs) reliability. In this paper, hierarchical whisker-like oxide/Cu cone structure was for the first time to be fabricated by combining electroless plating with heat treatment methods to enhance the interface adhesion between Cu-based substrate and EMC. The surface morphology was characterized by scanning electron microscope (SEM). Result shows that the hierarchical whisker-like oxide/Cu cone film is fine, dense and uniform; Single Cu cone structure is about 3-5 μm in height and 1 μm in root diameter; a layer of whisker-like oxide grows perpendicularly to circular surface of Cu cone, with length ranging from tens to hundreds of nanometers. Adhesion strength between the as-prepared substrates and EMC were measured by button shear test. With consideration of oxidation caused by practical processes (e.g. wire bonding), the interface of EMC and porous oxide formed at 260°C for 5 min was taken as standard sample, representative of practical interface. To further study the effect of whisker-like oxide and Cu cone solely on adhesion performance, whisker-like oxide, porous oxide/Cu cone were investigated as well. Button shear test results reveal that interfacial adhesion strength of EMC and whisker-like oxide, porous oxide/Cu cone, hierarchical whisker-like oxide/Cu cone are 85%, 110% and 162% higher than that of standard interface. Moreover, the mechanism for adhesion improvement was discussed by facture surface observation, failure path assumption and force-displacement curve analysis. Results show that interface of EMC and hierarchical whisker-like oxide/Cu cone exhibits brittle/ductile property with about 3-5 μm thick EMC left on the fracture surface, indicating cohesive failure caused by remarkable mechanical interlocking effect. © 2011 Elsevier Ltd. All rights reserved.

Interfacial adhesion between electrical contacts determined by surface quality

Adhesion improvement of Cu-based substrate and epoxy molding compound interface by hierarchical structure preparation

Intermittent Failure Mechanism and Stabilization of Microscale Electrical Contact

An adhesion model for contact electrification

Interfacial properties for real rough MEMS/NEMS surfaces by incorporating the electrostatic and Casimir effects-a theoretical study

Finite Element Modeling of the Nano-scale Adhesive Contact and the Geometry-based Pull-off Force

Electrical interconnect in MEMS/NEMS devices by Au/a-Si eutectic reaction

Adhesion Properties of Nanowire Surface Fastener

Experimental Investigation of the Contact Mechanism of Solid Surfaces with a Surface Force Apparatus

Characterisation of surface morphology of high voltage DC relay contacts under arc erosion

Finite Element Simulation and Analysis of Nano-Scale Adhesive Contacts

Evolution of contact performance of industry electrical connector based on reliability accelerated testing

Capillary adhesion governs the friction behavior of electrochemically corroded polycrystalline diamond

Effect of external electric field on copper/silica contact electrification and adhesion: insight from first-principles and molecular mechanics investigations

Parameter Characterization of Anodic Bonded Electrical Interconnect in MEMS/NEMS Devices

Investigation of the Contact Characteristics of Silicon–Gold in an Anodic Bonding Structure

Unraveling the cohesive and interfacial adhesive strengths of electrodes for automotive fuel cells

Study on the Mechanical Behavior of Adhesive Interface by Digital Image Correlation

Investigation into the Mitigation of Crevice Corrosion of Aluminum–Copper Contacts in Seawater by Regulating the Contact Surface Roughness

An investigation of methods to enhance adhesion of conductive layer and dielectric substrate for additive manufacturing of electronics