Abstract:An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li–Etsion–Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

Experimental Study on Nanosized Contact Point

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Fringing Field Effects on Electrical Resistivity of Semiconductor Nanowire-Metal Contacts

Theoretical and experimental study of the thermal contact resistance at the junction of crossed cylinders

Characterization of Thermal Transport Across Single-Point Contact Between Micro-Wires

Measurement Methods and Applications for Thermophysical Properties at Micro/Nanoscales

J0610104 Evaluation of Interatomic Force on the Tip of Probe by Using Microwave Atomic Force Microscope

Thermomechanical analysis of the effect of contact forces in heat conduction of composite materials through multiscale contact finite element modeling

Numerical study of thermal contact resistance considering spots and gap conduction effects

Non-contact Local Conductivity Measurement of Metallic Nanowires Based on Semi-Near-field Reflection of Microwave Atomic Force Microscopy

Development of a New Microscopic Four-Point AFM Probe for the Measurement of Local Electrical Conductivity

T0301-2-5 Modifying the Structure of Microwave AFM Probe for Improving the Sensitivity in the Measurement of Electrical Properties

Establishing Ohmic contacts for in situ current-voltage characteristic measurements on a carbon nanotube inside the scanning electron microscope.

Measuring the thermal contact resistance of a junction by T type probe method

Methodology for Measurement of Submicron Metallic Wire's Local Electrical Conductivity by Applying Four-points AFM Probe Technique

Non-equilibrium Molecular Dynamics Study of Nanoscale Thermal Contact Resistance

Experimental Investigation of the Thermal Impedance of Interstitial Material at A Junction

Enhancement of Sensitivity for the Evaluation of Electrical Properties by Modifying the Nano Structure of Microwave Afm Probe

A three-probe method for accurate nanoscale thermal transport measurements

Robust Ohmic contact junctions between metallic tips and multiwalled carbon nanotubes for scanned probe microscopy

Effect of air confinement on thermal contact resistance in nanoscale heat transfer