Abstract:Tetragonal zirconia nanopowders (3Y-TZP NPs) stabilized by 3 mol % Y2O3 were synthesized by a novel sol–gel–flux method. The effects of calcination temperature, Y2O3 content, and molten salt system (NaCl + KCl binary system and NaCl unary system) on the phase composition and morphology of nanopowders (NPs) were investigated. Meanwhile, the sintering properties of the prepared 3Y-TZP NPs were studied. The 3Y-TZP NPs and sintered ceramics were characterized by thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis, and X-ray fluorescence (XRF) spectroscopy. The results show that the optimum calcination temperature for obtaining dispersed ZrO2 NPs is reduced from 800 to 660 °C when the NaCl unary system is substituted by the NaCl + KCl binary system. 3Y-TZP NPs with a single tetragonal phase are obtained in the NaCl + KCl binary system when Y2O3 content in the raw material is 5 mol %. The average particle size of the obtained ZrO2 NPs is reduced from 47.25 nm in the unary system to 26.18 nm in the binary system because of the lower calcining temperature. Furthermore, the 3Y-TZP NPs obtained in the binary system have narrower particle size distribution and better sintering performance than ZrO2 NPs obtained in the unary system. After sintering for 4 h at 1200 °C, the former generated 3Y-TZP ceramics with higher density and finer grain size. This work produced narrow-distributed well-dispersed 3Y-TZP NPs with quasi-spherical morphology, which are good candidates for the applications, including oxygen sensors and thermal barrier coatings.

The Effect of Na Salt on the Destabilization of YSZ Ceramic

Hot corrosion behaviors of SrZrO3 ceramic co-doped with Y2O3 and Yb2O3 in molten Na2SO4, V2O5, and Na2SO4 + V2O5 salts mixture

Effect of thermal treatment at high temperature on phase stability and transformation of Yb2O3 and Y2O3 co-doped ZrO2 ceramics

Phase evolution and hot corrosion behavior of Yb2O3 and CeO2 co-doping YSZ ceramics under high temperature

Effect of Li2o Additions Upon the Crystal Structure, Sinterability and Electrical Properties of Yttria Stabilized Zirconia Electrolyte

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Size-driven phase transformation and microstructure evolution of ZrO2 nanocrystallites associated with thermal treatments

Influence of Y2O3 Doping on Phase Evolution and Dielectric Characteristics of ZrO2 Ceramics

Effect of Sodium on the Hydrothermal Stability of Y Zeolite

Influence of Stabilizers on Hydrothermal Behavior of Zirconia Coatings by APS

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

The Effect of Sintering Temperature on the Microstructure and Phase Transformation in Tetragonal YSZ and LZ/YSZ Composites

Sintering Properties of Tetragonal Zirconia Nanopowder Preparation of the NaCl + KCl Binary System by the Sol–Gel–Flux Method

A Search for Temperature Induced Time-Dependent Structural Transitions in 10 Mol%sc2o3–1 Mol%ceo2–zro2 and 8 Mol%y2o3–zro2 Electrolyte Ceramics

Effect of Al2O3 on Degradation of 3Y-TZP Ceramics at Low Temperature

Effect of temperature on solid particle impact erosion wear mechanism of 5 mol% Yttria Stabilized Zirconia ceramics

Chemical Compatibility Between Ln2Zr2O7 (ln = Nd, Sm, Gd) and Tetragonal Yttria Stabilized Zirconia after Annealing at High Temperatures

Effect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low Temperature

The Propertied Of Ysz Electrolyte Sintering At 1300 Degrees Enc

Effects of Yttrium on Wettability and Interactions Between Molten Superalloy and SiO2-based Ceramic Core

Effect of Gadolinia on Phase Structure and Thermal Conductivity of ZrO2–4.5 Mol%y2o3 Ceramics