Abstract:The thermophysical properties of dense ZrB2-20 vol% SiC ceramics (ZS) with and without doping of 5 vol % WC (ZSW) were characterized up to 1800 degrees C. Because of the in-situ formed WB with low thermal conductivity and the strong phonon scattering effect from (Zr,W)B-2 solid solution, the thermal conductivity of ZSW (36.2 W/(m K)) at room temperature is much lower than that of ZS (100.4 W/(m K)), however, their differences at 1800 degrees C is very limited (42.2 W/(m K) for ZSW and 47.4 W/(m . K) for ZS). The detailed calculation indicates that contributions from lattice vibrations on the thermal conductivity decreased to nearly zero at 1800 degrees C in both samples, therefore, electrical conductivity of ZS and ZSW dominates their thermal transport behavior at higher temperatures. Furthermore, amorphous phase with compositions of Ca-Al-Si-O was occasionally found at the triple junction of ZS, its softening and rewetting of the grain boundary at higher temperature were confirmed from the internal friction curve and microstructural characterization at different levels, which was thought to be responsible for the tremendous increase of Interfacial thermal resistance and continuous drop of thermal conductivity of ZS up to 1800 degrees C. On the contrary, benefiting from the clean boundary and tight triple junction in ZSW, its thermal conductivity can stabilize between 36 and 47 W/(m K) in a broad temperature range from 25 to 1800 degrees C. Based on the measurement above, the type of carriers and thermoelectric figure of merit (zT) in ZrB2-SiC based ceramics are also firstly reported. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Investigation of Electrical Properties of Pressureless Sintered ZrB2-based Ceramics

Electrical Properties of ZrB2–SiC Ceramics with Potential for Heating Element Applications

Properties of ZrB2-SiC Ceramics by Pressureless Sintering

Influence of the Metal Particle Size and Sintering Process on the Electrical Resistivity of M-Zro2/30%mo Cermet

Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering

Effects of Sintering Temperature and Holding Time on the Microstructure and Electric Properties of Ba(Zr0.3Ti0.7)O3 Ceramics

Mechanical Properties and In-Situ Toughening Mechanism of Pressurelessly Densified ZrB2–TiB2 Ceramic Composites

Pressureless Sintering of ZrB2–SiC Ceramics: the Effect of B4C Content

Low Temperature Sintering and Dielectric Properties of BaTi_(0.75)Zr_(0.25)O_3 Ceramic

Microstructure and properties of SrTiO3/ZrO2 ceramic composites prepared through pressureless sintering

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

Effects of porosity and pore size on mechanical and thermal properties as well as thermal shock fracture resistance of porous ZrB2–SiC ceramics

Preparation and Properties of ZrB2-SiC Porous Ceramics by Spark Plasma Sintering

Thermal and Electrical Transport in ZrB2-SiC-WC Ceramics Up to 1800 °C

Microstructure and Mechanical Properties of ZrB2-SiC Composites

Densification, Mechanical and Thermal Properties of ZrC1− Ceramics Fabricated by Two-Step Reactive Hot Pressing of ZrC and ZrH2 Powders

Thermal Shock Behavior of Porous ZrB2–SiC Ceramics

Synthesis, Mechanical and Physical Properties of Bulk Zr2Al4C5 Ceramic

Microstructural evolution and mechanical properties of ZrO<sub>2</sub> (3Y)-Al<sub>2</sub>O<sub>3</sub>-SiC(<sub>w</sub>) ceramics under oscillatory pressure sintering

Effects of sintering velocity on the microstructure and mechanical properties of hot-pressed ZrB2-SiC-ZrO2f ceramics

Microstructure and Mechanical Properties of Zrb2-Based Ceramics