Abstract:The rapid advancement of 3D concrete printing (3DCP) and the development of relevant cementitious material compositions can be seen in the last few decades. The commonly used 3DCP method is to build the structure layer by layer after extruding the material through a nozzle. Initially, the pumping and extrusion of the material should be done with considerable fluidity and workability. The extruded layers should retain their shape immediately after extruding and depositing. While constructing the structure in a layerwise manner, the bottom layers should have enough early age strength to support the layers at the top. Therefore, at different processes in 3DCP, the rheological requirement is contradictory. As the rheology of the material is the deterministic factor which decides the fluidity or workability of the mix, proper rheological characterization should be completed accurately. In some instances, due to the higher stiffness, and higher time and rate-dependent material behavior (thixotropic behavior) compared to the conventional concrete, standard rheology measurement techniques have many limitations when used for 3DCP material. Therefore, non-conventional and novel techniques can be implemented with suitable material models to characterize the rheology of 3DCP material. In this study, a comprehensive review was conducted on conventional and non-conventional methods used for characterizing the rheological parameters for 3DCP material. The previously conducted studies were highlighted with the targeted 3DCP processes in the study (if applicable), and rheological parameters achieved from the test (i.e., yield stress, viscosity, and thixotropy). In addition, some experimental studies were conducted to compare several selected testing methods. The rheological parameters achieved from different test methods were compared to identify the similarities, dissimilarities, pros, and cons between the test methods. Furthermore, the extrudability and buildability studies were conducted for the mixes to demonstrate the usage of the mixes in 3DCP applications and to correlate the achieved rheological parameters with these processes.

Rheological and Harden Properties of the High-Thixotropy 3D Printing Concrete

Rheology and pumpability of mix suitable for extrusion-based concrete 3D printing – A review

Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials

Anisotropic mechanical properties of extrusion-based 3D printed layered concrete

Rheological characterization of ultra-high performance concrete for 3D printing

3D Printed Concrete: Fresh and Hardened Properties

3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics

Printability region for 3D concrete printing using slump and slump flow test

State-of-the-art of Mechanical Properties of 3D Printed Concrete

Fresh Properties of a Novel 3D Printing Concrete Ink

Extrudability window and offline test methods to predict buildability of 3D printing concrete

The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite

Rheology of 3D Printable Concrete Prepared by Secondary Mixing of Ready-Mix Concrete

PVA Fibre Reinforced High-Strength Cementitious Composite for 3D Printing: Mechanical Properties and Durability

3D printing concrete technology from a rheology perspective: a review

Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison

Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping Strategy

Microstructural characterization of 3D printed concrete

Mixing and extrusion of printing concrete

3D printing concrete containing thermal responsive gelatin: Towards cold environment applications

Development of concrete mixes for 3D printing using simple tools and techniques