Abstract:The rapid advancement of 3D concrete printing (3DCP) and the development of relevant cementitious material compositions can be seen in the last few decades. The commonly used 3DCP method is to build the structure layer by layer after extruding the material through a nozzle. Initially, the pumping and extrusion of the material should be done with considerable fluidity and workability. The extruded layers should retain their shape immediately after extruding and depositing. While constructing the structure in a layerwise manner, the bottom layers should have enough early age strength to support the layers at the top. Therefore, at different processes in 3DCP, the rheological requirement is contradictory. As the rheology of the material is the deterministic factor which decides the fluidity or workability of the mix, proper rheological characterization should be completed accurately. In some instances, due to the higher stiffness, and higher time and rate-dependent material behavior (thixotropic behavior) compared to the conventional concrete, standard rheology measurement techniques have many limitations when used for 3DCP material. Therefore, non-conventional and novel techniques can be implemented with suitable material models to characterize the rheology of 3DCP material. In this study, a comprehensive review was conducted on conventional and non-conventional methods used for characterizing the rheological parameters for 3DCP material. The previously conducted studies were highlighted with the targeted 3DCP processes in the study (if applicable), and rheological parameters achieved from the test (i.e., yield stress, viscosity, and thixotropy). In addition, some experimental studies were conducted to compare several selected testing methods. The rheological parameters achieved from different test methods were compared to identify the similarities, dissimilarities, pros, and cons between the test methods. Furthermore, the extrudability and buildability studies were conducted for the mixes to demonstrate the usage of the mixes in 3DCP applications and to correlate the achieved rheological parameters with these processes.

Printability region for 3D concrete printing using slump and slump flow test

Rheology and pumpability of mix suitable for extrusion-based concrete 3D printing – A review

Testing Mortars for 3D Printing: Correlation with Rheological Behavior

A rheological-based printability assessment method for 3D printing Engineered Cementitious Composites considering fiber dispersion

Assessment of asymmetrical rheological behavior of cementitious material for 3D printing application

A novel method for improving the printability of cement-based materials: Controlling the releasing of capsules containing chemical admixtures

Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison

Printability region for 3D-printable engineered cementitious composites (3DP-ECC)

3D printing concrete technology from a rheology perspective: a review

Extrudability window and offline test methods to predict buildability of 3D printing concrete

A review of 3D printed concrete: Performance requirements, testing measurements and mix design

Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective

Influence of hydroxypropyl methylcellulose and silica fume on stability, rheological properties, and printability of 3D printing foam concrete

Tailoring Light-Weight Aggregates for Concrete 3D Printing Applications

Development of concrete mixes for 3D printing using simple tools and techniques

Rheological characterization of ultra-high performance concrete for 3D printing

Comprehensive investigations on the relationship between the 3D concrete printing failure criterion and properties of fresh-state cementitious materials

Comparative analysis of structural build-up in one-component stiff and two-component shotcrete-accelerated set-on-demand mixtures for 3D concrete printing

A critical review of preparation design and workability measurement of concrete material for largescale 3D printing

The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite

An investigation of rheological properties and sustainability of various 3D printing concrete mixtures with alternative binders and rheological modifiers