Abstract:The rapid advancement of 3D concrete printing (3DCP) and the development of relevant cementitious material compositions can be seen in the last few decades. The commonly used 3DCP method is to build the structure layer by layer after extruding the material through a nozzle. Initially, the pumping and extrusion of the material should be done with considerable fluidity and workability. The extruded layers should retain their shape immediately after extruding and depositing. While constructing the structure in a layerwise manner, the bottom layers should have enough early age strength to support the layers at the top. Therefore, at different processes in 3DCP, the rheological requirement is contradictory. As the rheology of the material is the deterministic factor which decides the fluidity or workability of the mix, proper rheological characterization should be completed accurately. In some instances, due to the higher stiffness, and higher time and rate-dependent material behavior (thixotropic behavior) compared to the conventional concrete, standard rheology measurement techniques have many limitations when used for 3DCP material. Therefore, non-conventional and novel techniques can be implemented with suitable material models to characterize the rheology of 3DCP material. In this study, a comprehensive review was conducted on conventional and non-conventional methods used for characterizing the rheological parameters for 3DCP material. The previously conducted studies were highlighted with the targeted 3DCP processes in the study (if applicable), and rheological parameters achieved from the test (i.e., yield stress, viscosity, and thixotropy). In addition, some experimental studies were conducted to compare several selected testing methods. The rheological parameters achieved from different test methods were compared to identify the similarities, dissimilarities, pros, and cons between the test methods. Furthermore, the extrudability and buildability studies were conducted for the mixes to demonstrate the usage of the mixes in 3DCP applications and to correlate the achieved rheological parameters with these processes.

Assessment of asymmetrical rheological behavior of cementitious material for 3D printing application

Testing Mortars for 3D Printing: Correlation with Rheological Behavior

Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective

Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison

3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics

3D printing concrete technology from a rheology perspective: a review

3D concrete printing: A lower bound analytical model for buildability performance quantification

Printability region for 3D concrete printing using slump and slump flow test

Review of Advances in 3D Printing Technology of Cementitious Materials: Key Printing Parameters and Properties Characterization

The evaluation of rheological parameters of 3D printable concretes and the effect of accelerating admixture

A rheological-based printability assessment method for 3D printing Engineered Cementitious Composites considering fiber dispersion

3D Printed Concrete: Fresh and Hardened Properties

Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping Strategy

Gravity induced flow to characterize rheological properties of printable cement-based materials

Modelling of 3D concrete printing based on computational fluid dynamics

Experimental Characterization of Anisotropic Mechanical Behaviour and Failure Mechanisms of Hardened Printed Concrete

Extrudability window and offline test methods to predict buildability of 3D printing concrete

Mechanical anisotropy, rheology and carbon footprint of 3D printable concrete: A review

Experimental Investigations on the Rheological Properties of the Proposed 3D Printing Mortar

Rheological and Harden Properties of the High-Thixotropy 3D Printing Concrete

Comparative analysis of structural build-up in one-component stiff and two-component shotcrete-accelerated set-on-demand mixtures for 3D concrete printing