Abstract:As we know, 3DPC is printed layer by layer compared with mold-casting conventional concrete. Pore structure and layer-to-layer interface are two main aspects of the internal structure for 3DPC, which decide 3DPC's mechanical performance. The layer-to-layer interface caused by printing is specific to 3DPC. The emphasis of this study lies in the layer-to-layer interfaces of 3DPC. The first aim of this study is to quantify the characteristics of the layer-to-layer interface and therefore characterize different aspects of the interfaces. The second aim of this study is to explore how the internal structure of printed concrete influences the mechanical performance of 3DPC. This research set out to design a series of experimental comparisons between 3DPC and casted concrete with the same compositions. Mechanical tests, i.e., compressive stress, ultrasonic Pulse Velocity test, flexural tension, and tension splitting, as well as the Ultrasonic Pulse Velocity test, were performed to check the mechanical performance of 3DPC. Contrary to what has often been expected, the mechanical test results showed the printed concrete has a quality not worse than casted concrete with the same recipe. Meanwhile, the X-ray computed tomography (X-CT) is used to characterize the internal structure, pore shapes, and interfaces of 3DPC. First, the investigation revealed that the lower total porosity and fewer big voids could be the fundamental causes meaning 3DPC has a better mechanical performance than casted concrete. Second, the statistics based on aspect ratio show that the distribution curves follow similar trends, regardless of the printed or casted concrete. Third, this study quantified the depth of the different interfaces for 3DPC. The results suggest that the porosity in an interface varies in a range. The author's pioneer work has contributed to our present understanding of the interfaces of 3DPC.

A review of 3D printed concrete: Performance requirements, testing measurements and mix design

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

Assessment of materials, design parameters and some properties of 3D printing concrete mixtures; a state-of-the-art review

Mix design, optimization and performance evaluation of extrusion-based 3D printable concrete

State-of-the-art of Mechanical Properties of 3D Printed Concrete

Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate Combinations

Optimization of 3D printing concrete with coarse aggregate via proper mix design and printing process

Mechanical properties, durability performance and interlayer adhesion of 3DPC mixtures: A state‐of‐the‐art review

3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics

Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates: Material, Equipment and Performance

Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate Gradation Optimization

Mechanical anisotropy, rheology and carbon footprint of 3D printable concrete: A review

Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials

Large-scale 3D printing concrete technology: Current status and future opportunities

A critical review of preparation design and workability measurement of concrete material for largescale 3D printing

3D printing concrete structures: State of the art, challenges, and opportunities

A Study on the Printability of Manufactured Sand Concrete

A Review of the Current Progress and Application of 3D Printed Concrete

3D printing concrete technology from a rheology perspective: a review

Incorporating coarse aggregates into 3D concrete printing from mixture design and process control to structural behaviours and practical applications: a review

Printability and Mechanical Anisotropy of 3D-Printed Concrete with Manufactured Sand Derived from Basalt