Abstract:This paper presents a programmable low power and low noise analog front-end (AFE) for electrocardiogram (ECG) signal acquisition. A novel capacitor-coupled instrumentation amplifier (CCIA) features independent biasing technique and AC coupling to signal source is proposed. Independent biasing technique is capable of obtaining better noise performance and more stable static working point reducing the glitch of chopping. An AC coupling style helps suppress electrode DC offset and enhance input impedance with metal-oxide-metal capacitor array, which is symmetrical to the center to alleviate the mismatch of input capacitor enhancing system common mode rejection ratio (CMRR). The current steering technology (CST) and programmable feedback capacitors are utilized to achieve an area-efficient programmable low pass filter (PLPF) under PVT variations. Also, a charge buck after PLPF is introduced to strengthen the driving ability of AFE. To verify the proposed AFE structure, a prototype is designed in 0.13 μm standard CMOS process with a 1.2 V supply. Post-simulation results show that the input impedance reaches 1.4 GΩ under 50 Hz. The in-band white noise density and integrating noise are 48 nV/sqrt (Hz) and 0.6 μV, respectively. The obtained low pass corner of PLPF are 380 Hz, 451 Hz and 1 kHz. The CMRR and PSRR under montecarlo simulation are 93 dB and 77 dB, respectively. The power of whole AFE is 48 μW.

Design of a Low Electrode Offset and High CMRR Instrumentation Amplifier for ECG Acquisition Systems

A decoupling-capacitor free and enlarged-ICMR ECG readout circuit using offset feedback cancelling and charge pump-sustained input stage techniques

A ECG Offset Cancelling Readout Circuit Using a Current Mode Feedback Loop Technique.

A 2.1/5.2-NEF/PEF Capacitively Coupled Instrumentation Amplifier with Fast - Settling for Biosensor

An Auto-Zeroing Chopper-Stabilized Capacitively Coupled Instrumentation Amplifier with 25-Vpp Common-Mode Interference Tolerance

A 7.5Gω-Input-impedance 109Db-Total-cmrr and 80Vpp-Cmi-tolerance Instrumentation Amplifier for Dry-Contact Two-Electrode ECG Monitoring

A 2-Electrode ECG Amplifier with 0.5% Nominal Gain Shift and 0.13% THD in a 530mvpp Input Common-Mode Range

An Adaptive Common-Mode Cancellation Biopotential Amplifier for Two-Electrode Dynamic ECG Recording

ECG AMPLIFIER DESIGN

Micro-Power Low-Offset Instrumentation Amplifier IC Design for Biomedical System Applications

A Programmable Analog Front-End with Independent Biasing Technique for ECG Signal Acquisition

Low Noise, High Input Impedance Digital-Analog Hybrid Offset Suppression Amplifier for Wearable Dry Electrode ECG Monitoring

An AC-Coupled Instrumentation Amplifier Achieving 110-Db CMRR at 50 Hz with Chopped Pseudoresistors and Successive-Approximation-Based Capacitor Trimming.

A Low Power Low Noise Front End Amplifier for ECG Monitoring

A 400 GΩ Input-Impedance Active Electrode for Non-Contact Capacitively Coupled ECG Acquisition with Large Linear-Input-Range and High CM-Interference-Tolerance

A Low-Noise and Low-Power Multi-Channel ECG AFE Based on Orthogonal Current-Reuse Amplifier.

A High DR High-Input-Impedance Programmable-Gain ECG Acquisition Interface with Non-inverting Continuous Time Sigma-Delta Modulator

A 20 Μw Dual-Channel Analog Front-End in 65nm CMOS for Portable ECG Monitoring System

A 1.8 Μw 32 Nv/√hz Current-Reuse Capacitively-Coupled Instrumentation Amplifier for EEG Detection

A 2.6 GΩ, 1.4 Μvrms Current-Reuse Instrumentation Amplifier for Wearable Electrocardiogram Monitoring

High Input Impedance Low-Noise CMOS Analog Frontend IC for Wearable Electrocardiogram Monitoring