Abstract:This paper presents a programmable low power and low noise analog front-end (AFE) for electrocardiogram (ECG) signal acquisition. A novel capacitor-coupled instrumentation amplifier (CCIA) features independent biasing technique and AC coupling to signal source is proposed. Independent biasing technique is capable of obtaining better noise performance and more stable static working point reducing the glitch of chopping. An AC coupling style helps suppress electrode DC offset and enhance input impedance with metal-oxide-metal capacitor array, which is symmetrical to the center to alleviate the mismatch of input capacitor enhancing system common mode rejection ratio (CMRR). The current steering technology (CST) and programmable feedback capacitors are utilized to achieve an area-efficient programmable low pass filter (PLPF) under PVT variations. Also, a charge buck after PLPF is introduced to strengthen the driving ability of AFE. To verify the proposed AFE structure, a prototype is designed in 0.13 μm standard CMOS process with a 1.2 V supply. Post-simulation results show that the input impedance reaches 1.4 GΩ under 50 Hz. The in-band white noise density and integrating noise are 48 nV/sqrt (Hz) and 0.6 μV, respectively. The obtained low pass corner of PLPF are 380 Hz, 451 Hz and 1 kHz. The CMRR and PSRR under montecarlo simulation are 93 dB and 77 dB, respectively. The power of whole AFE is 48 μW.

A 20 Μw Dual-Channel Analog Front-End in 65nm CMOS for Portable ECG Monitoring System

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

A Low Power Low Noise Front End Amplifier for ECG Monitoring

High Input Impedance Low-Noise CMOS Analog Frontend IC for Wearable Electrocardiogram Monitoring

A Low Power Low Noise Analog Front End for Portable Healthcare System

A Programmable Analog Front-End with Independent Biasing Technique for ECG Signal Acquisition

A Low-Noise and Low-Power Multi-Channel ECG AFE Based on Orthogonal Current-Reuse Amplifier.

A 4-Μw Analog Front End Achieving 2.4 NEF for Long-Term ECG Monitoring

A Programmable Analog Front-End IC Applied for Biomedical Signal Monitoring Systems

A 35 nV/√Hz Analog Front-End Circuit with Adjustable Bandwidth and Gain in UMC 40 nm CMOS for Biopotential Signal Acquisition

A low-offset analogue front-end IC for multi-channel physiological signal acquisition

A 1.2-V 7.2-μw ECG AFE with continuous time self-calibration filters

A 0.6V, 8.4uw AFE Circuit for Biomedical Signal Recording

A Compact Sub-μW CMOS ECG Amplifier With 57.5-MΩ Zin, 2.02 NEF, 8.16 PEF and 83.24-dB CMRR

A $64.8~\mu$ W > 2.2 G $\omega$ DC–AC Configurable CMOS Front-End IC for Wearable ECG Monitoring

A 1.2-V 7.2-Mu W Ecg Afe With Continuous Time Self-Calibration Filters

A TDM-based Analog Front-End for Ear-EEG Recording with 74.5-GΩ Input Impedance, 384-mV DC Tolerance and 0.27-μVrms Input-Referred Noise

Design and Analysis of a High-Gain, Low-Noise, and Low-Power Analog Front End for Electrocardiogram Acquisition in 45 nm Technology Using gm/ID Method

A Power Efficient ECG Front-End with Input-Adaptive Gain Reaching 67.6-Db Dynamic Range

A 66-Db Sndr, 8-Mu W Analog Front-End For Ecg/Eeg Recording Application

A Configurable 5.9 Mu W Analog Front-End For Biosignal Acquisition