Abstract:This paper presents a programmable low power and low noise analog front-end (AFE) for electrocardiogram (ECG) signal acquisition. A novel capacitor-coupled instrumentation amplifier (CCIA) features independent biasing technique and AC coupling to signal source is proposed. Independent biasing technique is capable of obtaining better noise performance and more stable static working point reducing the glitch of chopping. An AC coupling style helps suppress electrode DC offset and enhance input impedance with metal-oxide-metal capacitor array, which is symmetrical to the center to alleviate the mismatch of input capacitor enhancing system common mode rejection ratio (CMRR). The current steering technology (CST) and programmable feedback capacitors are utilized to achieve an area-efficient programmable low pass filter (PLPF) under PVT variations. Also, a charge buck after PLPF is introduced to strengthen the driving ability of AFE. To verify the proposed AFE structure, a prototype is designed in 0.13 μm standard CMOS process with a 1.2 V supply. Post-simulation results show that the input impedance reaches 1.4 GΩ under 50 Hz. The in-band white noise density and integrating noise are 48 nV/sqrt (Hz) and 0.6 μV, respectively. The obtained low pass corner of PLPF are 380 Hz, 451 Hz and 1 kHz. The CMRR and PSRR under montecarlo simulation are 93 dB and 77 dB, respectively. The power of whole AFE is 48 μW.

A ECG Offset Cancelling Readout Circuit Using a Current Mode Feedback Loop Technique.

A decoupling-capacitor free and enlarged-ICMR ECG readout circuit using offset feedback cancelling and charge pump-sustained input stage techniques

Design of a Low Electrode Offset and High CMRR Instrumentation Amplifier for ECG Acquisition Systems

An Adaptive Common-Mode Cancellation Biopotential Amplifier for Two-Electrode Dynamic ECG Recording

ECG AMPLIFIER DESIGN

Micro-Power Low-Offset Instrumentation Amplifier IC Design for Biomedical System Applications

A 2-Electrode ECG Amplifier with 0.5% Nominal Gain Shift and 0.13% THD in a 530mvpp Input Common-Mode Range

Low Noise, High Input Impedance Digital-Analog Hybrid Offset Suppression Amplifier for Wearable Dry Electrode ECG Monitoring

An Auto-Zeroing Chopper-Stabilized Capacitively Coupled Instrumentation Amplifier with 25-Vpp Common-Mode Interference Tolerance

A 7.5Gω-Input-impedance 109Db-Total-cmrr and 80Vpp-Cmi-tolerance Instrumentation Amplifier for Dry-Contact Two-Electrode ECG Monitoring

A 2.6 GΩ, 1.4 Μvrms Current-Reuse Instrumentation Amplifier for Wearable Electrocardiogram Monitoring

Biopotential multi-path current feedback instrumentation amplifier with automatic offset cancellation loop for resistive bridge microsensors

A Programmable Analog Front-End with Independent Biasing Technique for ECG Signal Acquisition

A 20 Μw Dual-Channel Analog Front-End in 65nm CMOS for Portable ECG Monitoring System

A Compact Sub-μW CMOS ECG Amplifier With 57.5-MΩ Zin, 2.02 NEF, 8.16 PEF and 83.24-dB CMRR

A Chopper Instrumentation Amplifier with Discrete-Time Compensation Based on Current Generation Unit to Eliminate Electrode DC Offset

A Low-Noise and Low-Power Multi-Channel ECG AFE Based on Orthogonal Current-Reuse Amplifier.

A-64.3 Db THD, 26 Nv/√hz Bio-Potential Readout Analog-Front-End Amplifier with a Gm-C Integrator-Implanted DC Servo Loop, and a Bulk-Driven Ripple Reduction Loop

A High DR High-Input-Impedance Programmable-Gain ECG Acquisition Interface with Non-inverting Continuous Time Sigma-Delta Modulator

A Low-Noise, Low-Power Amplifier With Current-Reused OTA for ECG Recordings.

A Capacitive-Feedback Amplifier with 0.1% THD and 1.18 μVrms Noise for ECG Recording