Abstract:An air-breathing micro direct methanol fuel cell (mu DMFC) with a water collecting and recycling cathode structure is presented in this paper. The mechanism of water generation in cathode and water collection from the cathode is studied. The capillary channels with hydrophilic surface are designed along the ribs of the air-breathing cathode window to collect excessive water. The collected water is then released via an exhaust pipe. Microfabrication techniques, including double-side lithography and KOH etching, are used to fabricate the anode and cathode plates of the mu DMFC on the same silicon wafer simultaneously. The silicon plate surface is treated by low temperature oxygen plasma to improve the hydrophilicity. The mu DMFC with the water collecting and recycling structure and the regular one without, both with an active area of 7.8 x 7.8 mm(2), are assembled and characterized. Experimental results show that the maximum power density and current density of the both mu DMFCs are more than 10 mW cm(-2) and nearly 100 mA cm(-2) at room temperature, respectively. After both mu DMFCs operate at 0.15 V (about 60 mA cm(-2) at room temperature) for 1 h, the outputs of the prototype with water collecting and recycling structure decrease to about 9.7 mW cm(-2) and 95 mA cm(-2) only, while that of regular one decrease to 9 mW cm(-2) and 75 mA cm(-2). The water is collected by the exhaust pipe in evidence. As such, it would be possible to recycle the water from cathode to anode. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

A Hydrophobic Layer-Based Water Feedback Structure for Passive Μ-Dmfc

A Novel Cathode Gas Diffusion Layer for Water Management of Passive Μ-Dmfc

A Water Management System for Metal-Based Micro Passive Direct Methanol Fuel Cells

Numerical Investigation of Cathode Water Management in Direct Methanol Fuel Cell with Micro-porous Layer

Enhanced Water Management Via the Optimization of Cathode Microporous Layer Using 3D Graphene Frameworks for Direct Methanol Fuel Cell

Improved DMFC water management via superwetting, high-performance catalyst synthesized by nanocapsule method

Structure Design and Implementation of the Passive μ-DMFC.

A new water management system for air-breathing direct methanol fuel cell using superhydrophilic capillary network and evaporation wings

Improved Vapor-Feed Direct Methanol Fuel Cell by Hydrophobic/Hydrophilic Composite Catalyst Layers via Kelvin Equation

Elimination of Water Flooding of Cathode Current Collector of Micro Passive Direct Methanol Fuel Cell by Superhydrophilic Surface Treatment

Constructing a Cathode Catalyst Layer of a Passive Direct Methanol Fuel Cell with Highly Hydrophilic Carbon Aerogel for Improved Water Management

Experimental Measurements of Fuel and Water Crossover in an Active DMFC

A Water Collecting and Recycling Structure for Silicon-Based Micro Direct Methanol Fuel Cells

Enhanced Water Management in the Cathode of an Air-Breathing PEMFC Using a Dual Catalyst Layer and Optimizing the Gas Diffusion and Microporous Layers

A microfluidic-structured flow field for passive DMFCs operating with highly concentrated fuels

Capillary-based Water Removal Cathode for an Air-Breathing Micro Direct Methanol Fuel Cell

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Hydrophilicity effect on micro-scale flow of µDMFC

Structural Design and Analysis of a Passive DMFC Supplied with Concentrated Methanol Solution

Investigation of a New Method to Prepare Low Methanol and Water Crossover Membrane Electrode Assembly for Passive Direct Methanol Fuel Cells

A CNT-MEA Compound Structure of Micro-Direct Methanol Fuel Cell for Water Management