Abstract:Overcoming the inherent strength-ductility trade-off remains a significant challenge in metallic materials. Most of the high-strength Mg-alloys having uniform ultrafine/fine-grained structure with a strong texture exhibit poor ductility at room temperature. Here, we prepared a novel multiscale hetero-structure in Mg-9Al-1Zn (AZ91) alloy, with a simultaneous high ultimate tensile strength and uniform ductility, i.e. ~400 MPa and ~14.5%, which is not accessible to previously reported uniform-grained Mg-alloys. Especially, the present multiscale hetero-structured AZ91 alloy is several times more ductile along with much enhanced toughness compared to its uniform-grained counterparts having comparable tensile strength. The multiscale microstructural heterogeneities, consisting of bimodal-structured (coarse grain ~10-100 μm and fine grain ≤10 μm) center-region and fine-grained surface-layer, were imparted by a new rolling process that combines advantages of both accumulative rolling bonding (ARB) and hard plate rolling (HPR). Using quasi-in-situ electron backscattered diffraction (EBSD) characterizations and slip trace analysis, the superior strength-ductility synergy was discussed in terms of the substantial activation of multiple strain accommodation mechanisms. Due to the high mechanical incompatibility of the multiscale hetero-structure, the hard-to-activate non-basal slips have occurred frequently in fine grains of both center-region and surface-layer. Moreover, the basal-oriented coarse grain in the bimodal-structured center-region plays a prominent role in the dislocation slip behavior of its neighboring fine grains, as reflected by a unique encircled slip trace distribution in them. Our findings reveal that multiscale hetero-structure enables the concurrent activation of various plastic deformation mechanisms. Thereby, the multiscale hetero-structure imparts a pronounced hetero-deformation induced hardening, contributing to enhanced strain-hardening ability, gaining an improved strength-ductility synergy. Our work could shed some light on designing and preparing strong and ductile metallic materials, by tailoring multiscale microstructural heterogeneity using a simple rolling technique.

High Strength and Ductile High Solid Solution Al–Mg Alloy Processed by a Novel Hard-Plate Rolling Route

Development of a Novel Strength Ductile Mg–7Al–5Zn Alloy with High Superplasticity Processed by Hard-Plate Rolling (HPR)

High Strength and Large Ductility of a Fine-Grained Al–Mg Alloy Processed by High Strain Rate Hot Rolling and Cold Rolling

Bimodal-Structured Al–Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature

Prominent Role of High-Volume Fraction Mg17Al12 Dynamic Precipitations on Multimodal Microstructure Formation and Strength-Ductility Synergy of Mg–Al–Zn Alloys Processed by Hard-Plate Rolling (HPR)

Enhanced Mechanical Properties and Thermal Stability Mechanism of a High Solid Solution Al-Mg Alloy Processed by Cryogenic High-Reduction Hard-Plate Rolling

Achieving Bimodal Microstructure and Enhanced Tensile Properties of Mg–9Al–1Zn Alloy by Tailoring Deformation Temperature During Hard Plate Rolling (HPR)

Achieving ultrahigh strength in binary Al-10Mg alloy through heavy cryogenic rolling

Developing High-Strength and Ductile Mg-Gd-Y-Zn-Zr Alloy Sheet Via Bimodal Grain Structure Coupling with Heterogeneously-Distributed Precipitates

Achieving High Strength and High Ductility in Magnesium Alloy Using Hard-Plate Rolling (HPR) Process.

Balancing the Strength and Ductility of Mg-6Zn-0.2Ca Alloy Via Sub-Rapid Solidification Combined with Hard-Plate Rolling

Effect of Large Thickness-Reduction on Microstructure Evolution and Tensile Properties of Mg-9Al-1Zn Alloy Processed by Hard-Plate Rolling

Novel Mg–Al–Sn–Zn–Y Alloys with Enhanced Strength−Ductility Combination Prepared by Hard‐Plate Rolling

Dynamic recrystallization, texture and mechanical properties of high Mg content Al–Mg alloy deformed by high strain rate rolling

A superplastic bimodal grain-structured Mg–9Al–1Zn alloy processed by short-process hard-plate rolling

Developing Novel Multiscale Hetero-Structure in Mg-Alloy for High Strength-Ductility Synergy by Short-Routed Rolling

A Rolled Mg‐8Al‐1Sm‐1Zn Alloy with High Strength‐Ductility via Single‐Pass Liner Rolling

Mechanistic Study of Mg-Mn-Al Extrusion Alloy with Superior Ductility and High Strength

Toward strength-ductility synergy in Al–Mg alloys: augmenting solute Mg concentration and strain-hardening ability via melt spinning and hot extrusion

A high-performance Mg-Al-Sn-Zn-Bi alloy fabricated by combining sub-rapid solidification and hot rolling

Spheroiding and Refining of Coarse CaMgSn Phase in Mg–Al–Sn–Ca Alloys for Simultaneously Improved Strength and Ductility Via Sub-Rapid Solidification and Controlled Rolling