Abstract:Most of the high-strength Mg alloys exhibit poor ductility at room temperature. Architecturing appropriate heterostructure in metallic materials gives rise to the breakthrough of the inherent strength-ductility trade-off dilemma. Here, we prepared a novel multiscale hetero-structure in Mg-9Al-1 Zn (AZ91) alloy, consisting of bimodal-structured center-region and fine-grained surface-layer, providing high strength and high ductility, i.e. yield strength of ∼303 MPa, tensile strength of ∼400 MPa, and elongation of ∼14.5 %. The multiscale microstructural heterogeneities were induced via a simple rolling process that combines the advantages of both accumulative rolling bonding (ARB) and hard plate rolling (HPR). By utilizing quasi-in-situ electron backscattered diffraction (EBSD)-digital image correlation (DIC) characterizations combined with the determination of dislocation/disclination distributions, it has been found that diversified strain accommodation mechanisms are stimulated by the strain incompatibilities near hetero-interfaces in the multiscale hetero-structure. In particular, non-basal slips have been activated largely in both the bimodal-structured center-region and fine-grained surface-layer. Moreover, a unique slip trace distribution has been observed in the fine grains adjacent to the basal-oriented coarse grain. Such a strain accommodation can better coordinate local strain incompatibility among the hetero-interface. The uniaxial loading–unloading–reloading tensile loop tests demonstrate that the multiscale heterogeneities impart a pronounced hetero-deformation induced hardening during tensile deformation. Multiple deformation modes, including the non-Schmid and non-basal slips, have been activated substantially in the multiscale hetero-structured Mg alloy, effectively relaxing local stress concentration and achieving stable plastic flow at a high-stress state, which is beneficial to improving strain-hardening ability and strength-ductility synergy. Our work could shed light on designing and processing strong and ductile Mg alloys, by tailoring proper microstructural heterogeneity to activate cooperated accommodating deformation modes.

Tailoring bimodal grain structure of Mg-9Al-1Zn alloy for strength-ductility synergy: Co-regulating effect from coarse Al2Y and submicron Mg17Al12 particles

Development of bimodal grain-structured Al-Zn-Mg-Cu-Zr alloys for strength-ductility synergy via microalloying with Hf and Sc

Bimodal-grain structure enables superior strength-ductility synergy of pure Al

Tailoring strength and ductility of Mg97Y2Zn1 alloy through the architecture of heterogeneous lamellar structure by large-ratio hot extrusion

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Effect of a bimodal grain structure on corrosion behavior and tensile properties of low-alloyed Mg-1Bi-1Zn-1Ag alloy

Achieving High Strength-Ductility Synergy in Low-Alloyed Mg-Li-Er Extrusion Alloys via Tailoring Bimodal-Grained Structure

Simultaneous improvement of strength and damping capacity of Mg-Mn alloy by tailoring bimodal grain structure

Effective strengthening and toughening in Zn–1Mg alloy with bimodal grain structure achieved by conventional extrusion

Achieving Enhanced Mechanical Properties of Extruded Mg-Gd-Y-Zn-Zr Alloy by Regulating the Initial LPSO Phases

An insight into plastic deformation behavior of bimodal-grained Mg–1Mn–0.5Al–0.5Ca alloy

Toward strength-ductility synergy in Al–Mg alloys: augmenting solute Mg concentration and strain-hardening ability via melt spinning and hot extrusion

Exploring the Hall-Petch relation and strengthening mechanism of bimodal-grained Mg–Al–Zn alloys

Influence of bimodal microstructure on strength and ductility of as-extruded Mg-Gd-Y-Zr alloy

Deformation and Fracture Mechanisms of an Annealing-Tailored "bimodal" Grain-Structured Mg Alloy

Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design

Achieving exceptional ultrahigh-strength in low-alloy Mg-1Al-1Ca-0.4Mn (wt%) alloy by regulating bimodal microstructure

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

Influence of Al2Y particles on mechanical properties of Mg-11Y-1Al alloy with different grain sizes

Deformation mechanisms in a novel multiscale hetero-structured Mg alloy with high strength-ductility synergy

Achieving ultrahigh strength in binary Al-10Mg alloy through heavy cryogenic rolling