Abstract:Superplastic forming, as an advanced manufacturing method, is especially important for producing complex-shaped components for Mg-alloys. Superplasticity can be achieved through grain boundary sliding at elevated temperatures in high-alloyed Mg systems, with a typical grain size < 10 μm stabilized by high densities of intermetallic precipitates. However, it is difficult to stabilize small grains and facilitate grain boundary sliding in low-alloyed systems due to insufficient precipitates. Here, by utilizing a distinctive design strategy, i.e. introducing solute segregation to enhance stability of the fine-grained structure, we obtained an Mg-1Zn-0.2Ca-0.2Zr-0.1Ag (wt. %) alloy achieving ∼450% superplastic strain. Through quasi-in-situ Electron Backscatter Diffraction analyses, we investigated systematically microstructure evolutions during superplastic deformation of the alloy at different strains. It has been found that superplasticity is achieved through the absorption of intragranular dislocations by grain boundaries, which are associated with stress-driven grain boundary migration mediated by disclination-dislocation reactions. By using a theoretical description based on stress-driven grain boundary migration and disclination-dislocation reactions, our model can capture multiple superplasticity mechanisms (e.g., grain boundary sliding and grain rotation), which establishes a fundamental relationship between the evolution of microstructural defects and the strain accommodation during superplastic deformation. Our results not only suggest an effective way to achieve superplasticity in low-alloyed Mg systems, but also provide a new insight to elucidate the nature of superplasticity mechanism by revealing the intrinsic correlation between stress-induced grain boundary migration and disclination/dislocation motion.

On Mechanical Properties and Superplasticity of Mg–15Al–1Zn Alloys Processed by Reciprocating Extrusion

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Introducing Equiaxed Grains and Texture into Ni-Mn-Ga Alloys by Hot Extrusion for Superplasticity

An Mg‐Al‐Zn Alloy with Verry High Specific Strength and Superior High‐strain‐rate Superplasticity Processed by Reciprocating Extrusion

Microstructural evolution and superplasticity of Al-5.8Mg-0.23Mn alloys processed by reciprocating extrusion

Superplasticity of 5083 Alloys with Zr and Mn Additions Produced by Reciprocating Extrusion

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

High Strain Rate Quasi-Superplasticity Behavior in an Ultralight Mg-9.55Li-2.92Al-0.027Y-0.026Mn Alloy Fabricated by Multidirectional Forging and Asymmetrical Rolling

Realizing impressive superplasticity in a low-alloyed Mg-Zn-Ca-Al-Mn alloy: The roles of grain boundary segregation and dense β-Mn particles

Achieving superior mechanical properties in a low-alloyed magnesium alloy via low-temperature extrusion

Effect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg–Al–Zn Alloy Prepared by Solid‐State Recycling of Mixed Waste Chips

Microstructures and Mechanical Properties of a High-Strength Mg-3.5Sm-0.6Zn-0.5Zr Alloy

Achieving high strain rate superplasticity in an Al-Cu-Li alloy processed by thermo-mechanical processing

High Strain Rate Superplasticity in Al-Zn-Mg-Based Alloy: Microstructural Design, Deformation Behavior, and Modeling

Enhanced Mechanical Properties of Extruded Mg–Y–Zn Alloy Fabricated Via Low-Strain Rolling

Revealing the dynamic recrystallization mechanism, extrusion deformation mechanism, and tensile deformation behavior of Mg–6Al–1Zn–1.1Sc alloy

Enhanced strength-ductility synergy and activation of non-basal slip in as-extruded Mg–Zn–Ca alloy via heterostructure

Microstructure evolution, strengthening mechanisms and deformation behavior of high-ductility Mg−3Zn−1Y−1Mn alloy at different extrusion temperatures

Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system

Investigation of the optimum preheating treatment parameters for extruded Mg–Gd–Y–Zn–Zr alloy using high-throughput experiments

Effect of Artificial Cooling Extrusion on Microstructure and Mechanical Properties of Mg–Zn–Y Alloys