Abstract:As the titanium industry rapidly develops, low-grade ilmenite resources are drawing global attention. The direct use of low-grade ilmenite can result in low production efficiency and heavy pollution. In addition, the production of high-titanium slag via electric furnace melting consumes significant energy and possesses low production efficiency. Therefore, a novel process with low energy consumption is necessary for producing ultra-grade slag (UGS) for chlorination. For low-grade ilmenite, semi-molten reduction and magnetic separation were suggested in this study. The effects of carbon content, reduction time, and Na2CO3 addition on the reduction and separation behavior were studied. The results showed that the addition of Na2CO3 favored the formation of a semi-molten state, which was more conducive for the diffusion, aggregation, and growth of the metal phase. In this regard, excess carbon was not helpful, and it weakened the growth of the metal phase. Wet grinding and magnetic separation were used for beneficiation of the reduced sample for efficiently separating the slag iron and preventing the formation of agglomerates between slag and metal. For the sample with a carbon dosage of 13 pct, Na2CO3 dosage of 8 pct, reduction temperature of 1673 K (1400 °C), and 90 minutes holding time, high-titanium slag with a TiO2 grade of 81.63 pct and iron content of 4.53 pct was produced, with the TiO2 recovery rate of 93.43 pct and the yields of 55.37 pct. High-titanium slag can be used as a high-quality raw material to produce UGS for chlorination by leaching.

Electrolytic Synthesis of Ferrotitanium Powders from Ilmenite in CaCl2-NaCl Melts at a Lower Temperature of 700 °C

Synthesis of micro-FeTi powders by direct electrochemical reduction of ilmenite in CaCl2-NaCl molten salt

Preparation of Ferrotitanium from Ilmenite by Electrolysis-Assisted Calciothermic Reduction in CaCl2-NaCl Molten Salt

Preparation of Ferrotitanium Alloy from Ilmenite by Electrochemical Reduction in Chloride Molten Salts

Enhancement of the Low Temperature Chlorination of Ilmenite with CCl4 by Adding Cl2

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Removal of Iron from Titanium Ore through Selective Chlorination Using Magnesium Chloride

Direct Electrosynthesis of Fe-TiC Composite from Natural Ilmenite in Molten Calcium Chloride

Direct Electro-deoxidation of Ilmenite Concentrate to Prepare FeTi Alloy in CaCl2 Molten Salt

Ilmenite Chlorination: Usage of Gaseous Carbon Tetrachloride at Relatively Lower Temperatures

Iron Extraction from South African Ilmenite Concentrate Leaching by Hydrochloric Acid (HCl) in the Presence of Reductant (Metallic Fe) and Additive (MgSO4)

Equilibrium between titanium ions and high-purity titanium electrorefining in a NaCl-KCl melt

High-Titanium Slag Preparation Process by Carbothermic Reduction of Ilmenite and Wet-Magnetic Separation

Experimental investigation on the formation mechanism of the TiFe alloy by the molten-salt electrolytic titanium concentrate

Mechano-thermic reduction of low-grade titanium ore for high-grade TiO2 synthesis

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

New Method for Low-Cost Titanium Production

Production of Titanium Dioxide Directly from Titanium Ore through Selective Chlorination Using Titanium Tetrachloride

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt