Abstract:The GaN-based white light-emitting diode (LED), in which 4 \(\times\) 4 arrayed micro-pixels are packaged using chip-on-board technique, is fabricated for both illumination and visible light communication. The features of the electrical, optical, and communication characteristics related to the injected current are analysed. It is implied that the saturated injected current could be the optimised injected current for both illumination and communication, if the highest light-output power (LOP) and the largest 3-dB modulation bandwidth are desired. However, in order to improve the electro-optic conversion efficiency (EOC) and the lifetime for practical devices, the huge current density should be avoided and a small injected current should be better. In our experiments, if the injected current is reduced from the saturated injected current of 130 mA (4597.8 A/\(\hbox {cm}^2\)) to 20 mA (707.4 A/\(\hbox {cm}^2\)), the EOC and the lifetime of 95% LOP are improved from 3.1 to 11.4% and extended from 16.5 to 1560 h, respectively, while the total LOP of arrayed pixels and the 3-dB modulation bandwidth are still good values. The characteristics before and after the ageing process with different injected current are also discussed. It is shown that the ageing process has permanent degradation of the electrical and optical performance but has little effects on the modulation bandwidth of the 60-μm-diameter micro-LEDs in the experiments. Moreover, the small injected current leads to minimal degradation and would be the preferred choice.

Improving the −3 Db Bandwidth of Medium Power GaN-based LEDs Through Periodic Micro Via-Holes for Visible Light Communications

GaN-based Mid-Power Flip-Chip Light-Emitting Diode with High -3 Db Bandwidth for Visible Light Communications.

Improving modulation bandwidth and optical power of GaN‐based blue LED by hollow‐runway active area

Improvement in Modulation Bandwidth of Micro-LED Arrays Based on Low-Temperature-Interlayer Approach

Improving Modulation Bandwidth of C-Plane GaN-based Light-Emitting Diodes by an Ultra-Thin Quantum Wells Design.

GaN-Based Freestanding Micro-LEDs with GHz Bandwidth and Low Efficiency Droop for Visible Light Communication

Improving the Modulation Bandwidth of GaN‐Based Light‐Emitting Diodes for High‐Speed Visible Light Communication: Countermeasures and Challenges

High-Speed Parallel Micro-LED Arrays on Si Substrates Based on Via-Holes Structure for Visible Light Communication

Large-signal Modulation Characteristics of a GaN-based Micro-Led for Gbps Visible-Light Communication

A Power-Type Single Gan-Based Blue Led with Improved Linearity for 3 Gb/S Free-Space Vlc Without Pre-Equalization

High Bandwidth Semi-Polar InGaN/GaN Micro-LEDs With Low Current Injection for Visible Light Communication

Modulation Characteristics of GaN-Based Light-Emitting-Diodes for Visible Light Communication

Compromise between illumination performance and modulation bandwidth for micro-size white light-emitting diode by selecting injected current

Study On The Influence Of Led Pn Junction Area On Modulation Bandwidth In Visible Light Communication

Modulation bandwidth improvement of GaN-based green micro-LEDs array by polarization-induced p-type doping

Improved Performance of InGaN-based Red Light-Emitting Diodes by Micro-Hole Arrays

GaN-based Parallel Micro-Light-emitting Diode Arrays with Dual-Wavelength InxGa1-xN/GaN MQWs for Visible Light Communication

High-Efficiency, Microscale Gan Light-Emitting Diodes and Their Thermal Properties on Unusual Substrates

Low-Power High-Bandwidth Non-Polar InGaN Micro-LEDs at Low Current Densities for Energy-Efficient Visible Light Communication

High-Speed Micro-LEDs Based on Nano-Engineered InGaN Active Region Towards Chip-to-Chip Interconnections

Direct Epitaxial Approach to Achieve a Monolithic On-Chip Integration of a HEMT and a Single Micro-LED with a High-Modulation Bandwidth