Abstract:Efficient GaN-based green micro light-emitting diodes (micro-LEDs) are critical for novel full-color displays. In this work, triangular-mesa micro-LED arrays with full-A-side (sample A) and full-M-side (sample M) were fabricated using InGaN-based quantum dot green LED epitaxial wafers grown by plasma-assisted molecular beam epitaxy. The two samples were soaked in a tetramethylammonium hydroxide solution to remove the damage caused by dry etching on their sidewalls. The effect of the crystallographic orientations of device sidewalls on the optoelectronic performance of micro-LEDs was investigated. The result indicates that the external quantum efficiency (EQE) of the as-prepared micro-LEDs with both structures has been greatly improved compared with the normal-structured micro-LEDs. The peak EQE of sample A is 43% higher than that of sample M. Most importantly, the peak EQE of sample A is 80% higher than that of conventional quadrilateral devices. The efficiency improvement of sample A is attributed to the increasing light extraction efficiency because zigzagged sidewalls are performed after the sidewall repair process in sample A, while flat sidewalls are in sample B. However, the zigzagged sidewalls simultaneously bring about a larger leakage current because more surface defects are formed on larger equivalent sidewall surface areas. In addition, the two samples exhibit excellent wavelength stability due to the weakened polarization field in quantum dots. Therefore, it is a promising method for improving the luminous efficiency of InGaN QD-based micro-LEDs by adopting a full-A sidewall structure.

Improved Performance of InGaN-based Red Light-Emitting Diodes by Micro-Hole Arrays

Efficient InGaN-based Red Light-Emitting Diodes by Modulating Trench Defects

InGaN-based Red Light-Emitting Diodes: from Traditional to Micro-Leds

The Performance of InGaN-based Red/green Micro-Leds

Performance Improvement of InGaN Red Light‐Emitting Diode by Using V‐Pits Layer and Step‐Graded GaN Barrier

Investigation of InGaN-based red/green micro-light-emitting diodes

630-Nm Red InGaN Micro-Light-emitting Diodes (<20 Μm × 20 Μm) Exceeding 1 Mw/mm2 for Full-Color Micro-Displays

High-brightness InGaN-based Red Microleds Exceeding 1 Mw/mm2

Ultrasmall and Ultradense InGaN-based RGB Monochromatic Micro-Light-emitting Diode Arrays by Pixilation of Conductive P-Gan

The efficiency enhancement of InGaN-based red LEDs with thick GaN underlying layers

Demonstration of 621-Nm-wavelength InGaN-based Single-Quantum-well LEDs with an External Quantum Efficiency of 4.3% at 10.1 A/cm2

A new structure of p-GaN/InGaN heterojunction to enhance hole injection for blue GaN-based LEDs

External Quantum Efficiency Enhancement of InGaN-Based Quantum Dot Green Micro-Light-Emitting Diode Arrays by Fabricating Full-A-Sided Triangular Mesa

High-temperature Performance of InGaN-based Amber Micro-Light-emitting Diodes Using an Epitaxial Tunnel Junction Contact

Performance improvement of red, green and blue InGaN micro-LEDs with distributed Bragg reflector

Investigation on the Optical Properties of Micro-LEDs Based on InGaN Quantum Dots Grown by Molecular Beam Epitaxy

Metal Organic Vapor Phase Epitaxy of High-Indium-composition InGaN Quantum Dots Towards Red Micro-Leds

Green and Red Light-Emitting Diodes Based on Multilayer InGaN/GaN Dots Grown by Growth Interruption Method

InGaN-Based microLED Devices Approaching 1% EQE with Red 609 nm Electroluminescence on Semi-Relaxed Substrates

Improved Performance of Inverted Quantum Dots Light Emitting Devices by Introducing Double Hole Transport Layers

Performance Improvement of AlGaInP Based Red LEDs by Combination of Omnidirectional Mirror and AuZn Micro-contacts