Abstract:The structure and martensitic transformation of the particles in Fe1-xNix (0 less than or equal to x less than or equal to60 at %) granular films prepared by magnetron sputtering were investigated by TEM and TEM dynamic observations respectively, TEM observation shows that the particle size in the as-sputtered state is less than 10nm, but the structure depends on the Ni content, i.e., bcc martensite is stable when 0 less than or equal to x less than or equal to 36 at % and fec austenite becomes stable when x=60 at %, while both bee and fec can co-exist when 36 at % less than or equal to x< 60 at %. The existence of a single bcc structure with high Ni content in the present specimens is significantly different from that in the bulk specimen and also different from that in the specimen prepared by vacuum-deposition method. The structure evolution during the temperature change indicates that martensitic transformation of nano-sized particles is quite different from that of bulk alloys. When the specimens were heated Lip to 573 similar to 773K in TEM, the bcc-->fcc reverse transformation occurred. The reverse transformation temperatures are roughly estimated as the same as those of the corresponding bulk alloys. However, the martensitic transformation did not occur when the specimens were cooled down to room temperature, even to 77K, indicating that the size reduction of particles results in the stability of austenite. In view of the stability of nano-sized austenite particles, it is Suggested that the martensite in as-sputtered Fe-Ni films is not a product of martensitic transformation, but directly originates from the collision of atoms during the sputtering.

Initiatory Investigation on High-density Nano Precipitation of(非汉字符号) in Fe-N Austenite

TEM Observation of High-density Nano Precipitation Fe4N in High-Nitrogen Austenite

Microstructure and Characterization of High Hardness Produced in High-Nitrogen Austenite Intermediate Temperature Transformation

Preparation of Α′-Fe(n)/α′-fe8n by Γ′-Fe4n Precursor

Isothermal decomposition behavior of the high nitrogen concentration γ-Fe[N] prepared from pure iron

Investigating Nano-Precipitation in a V-containing HSLA Steel Using Small Angle Neutron Scattering

In-situ Observation on the Isothermal Decomposition Process of Γ-Fe[n] by X-ray Diffraction

Nanoprecipitation-suppressed Ferrite Transformation (γ → Α) During Tempering in a Medium‑manganese Steel

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Research on Mediate Temperature Decomposition of High Nitrogen Austenite

Intermediate Temperature Transformation of the High-nitrogen Austenite

Morphology and Crystallographic Orientation Relationship in Isothermally Transformed Fe–N Austenite

An investigation on nitrogen uptake and microstructure of equimolar quaternary FeCoNiCr high entropy alloy after active-screen plasma nitriding

Quantitative Investigation of Deformation Induced Precipitation in Coarse Grained Austenite Htp Steel

Studies on the Sample Preparation and Mediate Temperature Isothermal Tempering Process for Austenite with Homogeneous Nitrogen Content

Isothermal transformation of high-nitrogen austenite

IN SITU OBSERVATION OF GROWTH OF BAINITE IN Fe-Ni ALLOY

Nucleation of Austenite from Pearlitic Structure in an Fe–0.6C–1Cr Alloy

The Structure And Martensitic Transformation Of Nano-Sized Particles In Fe-Ni Films

Magnetic Properties and Thermal Stability of Nanocrystalline Ε-Fe3n Prepared by Gas Reduction-Nitriding Method

Optimization of Grain Boundary Character Distribution of Fe-19Cr-10Mn-1Ni-0.53N High Nitrogen Austenitic Stainless Steel