Abstract:Based on theoretical calculations, laboratory simulation research and industrial production data analysis combined with characterisations such as metallographic microscope, scanning electron microscope (SEM), transmission electron microscope (TEM) and microhardness testing, this study investigated the state of occurrence and the precipitation law of vanadium (V) in microalloyed steel to determine a reasonable production process for V microalloyed steel. The results showed that the V(C,N) precipitation phase was the main form of V in microalloyed steel that precipitated after the transformation of austenite to ferrite. The amount of V precipitation was positively correlated with the amount of V that was added. However, the precipitation temperature was not significantly correlated with the amount added. When the V content increased from 0.03% to 0.06%, the initial precipitation temperature only increased by 23 °C. The coiling temperature was identified as the core factor affecting the strength of V microalloyed steel. When the effects of precipitation strengthening and microstructure strengthening were considered, as the coiling temperature decreased, the strength first increased, then decreased and finally increased again. Under different processing conditions, the strengthening of vanadium in the material increased first and then decreased as the temperature decreased (700–200 °C). The corresponding temperatures for the best strengthening effect of aging treatment, industrial statistical data and simulating coiling were 550, 470 and 400 °C, respectively. The difference between laboratory research results and industrial production was found. When V precipitation strengthening was used to improve material properties, it was necessary to determine a reasonable quantity of V to add and the production process, according to different alloy systems, to make more effective use of V microalloyed resources.

Investigating Nano-Precipitation in a V-containing HSLA Steel Using Small Angle Neutron Scattering

Analysis of the Extent of Interphase Precipitation in V-HSLA Steels Through In-Situ Characterization of the Γ/α Transformation

In Situ Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA Steels

Strain-Induced Precipitation Kinetics of Vanadium Carbonitride Precipitates with the Cubic Structure in High-Strength Weathering Steels

Strengthening of Low Carbon Steel by Nano-sized Vanadium Carbide in Ferrite and Tempered Martensite

Study of Precipitates in Oxide Dispersion-Strengthened Steels by SANS, TEM, and APT

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Quantitative Investigation of Deformation Induced Precipitation in Coarse Grained Austenite Htp Steel

Influence of V on the Microstructure and Precipitation Behavior of High-Carbon Hardline Steel during Continuous Cooling

Multiphase precipitation and its strengthening mechanism in a V-containing austenite-based low density steel

Precipitation of Κ-Carbide in a V-Containing Austenite-Based Lightweight Steel

Elucidating the dual effect of vanadium microalloying on hot deformation behavior of high nitrogen martensitic stainless steel

3D atom probe characterization of temporal evolution of precipitates in aging Nb-V micro-alloyed steel

Carbide Precipitation during Processing of Two Low-Alloyed Martensitic Tool Steels with 0.11 and 0.17 V/Mo Ratios Studied by Neutron Scattering, Electron Microscopy and Atom Probe

Initiatory Investigation on High-density Nano Precipitation of(非汉字符号) in Fe-N Austenite

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

The Effect of Size of Cu Precipitation on the Mechanical Properties of Microalloyed Steel

Precipitation Law of Vanadium in Microalloyed Steel and Its Performance Influencing Factors

The Effect of Solution and Precipitation of Nb and V on the Continuous Cooling Transformation of Undercooling Austenite in High-Strength 20mnsi Steel

Investigation of Hierarchical Precipitation on Bimodal-Grained Austenite and Mechanical Properties in Quenching-Partitioning-tempering Steel

Predicting Yield Stress in a Nano-Precipitate Strengthened Austenitic Steel by Integrating Multi Length-Scale Simulations and Experiments