Abstract:In this paper, the thermodynamic model of nitrogen solubility in vanadium nitrogen microalloyed high strength weathering steels of Fe–Cr–Mn–V–N system, according to Hillert’s model for Gibbs energy of its various phases, was established and validated. In the model, the effect of the nitrogen partial pressure on the activity coefficient and the lattice structure characteristics of the vanadium nitrogen precipitated phase were considered. It would be of guiding significance for the design and smelting of Fe–Cr–Mn–V–N system alloys. Based on the established model, the nitrogen contents in δ , γ , α phase and liquid were calculated as a function of the temperature for Fe–Cr–Mn–V–N system alloys. The results show that: first, the maximum solubility of nitrogen in the solidification process is obviously affected by the phase transition when there is a sudden change in the solubility of nitrogen at the phase transition point. The maximum nitrogen solubility of the molten steel in the delta phase region determines whether nitrogen bubbles are formed during the solidification process. The nitrogen solubility is lowest in the solid–liquid region (about 1673 K). Secondly, the increase of Cr and Mn content is beneficial to improve nitrogen solubility in liquid and solid phases. However, the increase of V content mainly affects the nitrogen solubility in the solid phase because the nitrogen in this temperature range is precipitated in the form of vanadium nitride, as the second phase plays a role in strengthening. In addition, the alloying element Mn has a significant effect on nitrogen solubility since the Mn element is the promoting element of austenitic formation. During the solidification process, the delta ferrite region gradually reduces and may disappear with increasing Mn content. Therefore, increasing the Mn content of the alloy system in the design of alloy composition, can reduce the precipitation trend of the nitrogen during the solidification process, which can effectively avoid bubble formation in high nitrogen weathering steels. Lastly, with the increase in the nitrogen partial pressure, the solubility of nitrogen increases during the liquid and solid phases.

Strain-Induced Precipitation Kinetics of Vanadium Carbonitride Precipitates with the Cubic Structure in High-Strength Weathering Steels

Precipitation Behavior and Aging Hardening of Vanadium Alloys

Microstructures-based Constitutive Analysis for Mechanical Properties of Gradient-Nanostructured 304 Stainless Steels

Strain-induced Precipitation Kinetics of Nb(C,N) and Precipitates Evolution in Austenite of Nb–Ti Micro-Alloyed Steels

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Complex isothermal precipitation behavior of V(C, N) in V-, N-added low carbon steel

Precipitation Law of Vanadium in Microalloyed Steel and Its Performance Influencing Factors

Influence of V on the Microstructure and Precipitation Behavior of High-Carbon Hardline Steel during Continuous Cooling

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Randomization of Ferrite/austenite Orientation Relationship and Resultant Hardness Increment by Nitrogen Addition in Vanadium-microalloyed Low Carbon Steels Strengthened by Interphase Precipitation

An Analytical Model for the Kinetics of Strain-Induced Precipitation in Titanium Micro-Alloyed Steels

Influence of N/C ratio on microstructure and properties of new high-strength weathering steels

Design of New Weathering Steels Through Thermodynamic Model of Nitrogen Solubility and CALPHAD

Effect of isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels with varying carbon and nitrogen levels

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Elucidating the dual effect of vanadium microalloying on hot deformation behavior of high nitrogen martensitic stainless steel

Strengthening of Low Carbon Steel by Nano-sized Vanadium Carbide in Ferrite and Tempered Martensite

Influence of Grain Boundary Carbides on Mechanical Properties of High Nitrogen Austenitic Stainless Steel

Research on Nitrogen Solubility of Fe–Cr–Mn–V–N System Alloys in Liquid and Solid Phases

Effects of Vanadium Microalloying and Intercritical Annealing on Yield Strength–Ductility Trade-Offs of Medium-Manganese Steels

Characterization and Control of Secondary Phase Precipitation of Nb-V-Ti Microalloyed Steel during Continuous Casting Process