Abstract:Gaseous nitriding of steel and iron can significantly improve their properties, for example corrosion resistance, fatigue endurance and tribological properties. In order to obtain a better understanding of the early stages of formation of the initial cubic primitive γ'-Fe4N, the mechanism and crystallography of the α-γ' phase transformation was investigated under simplified conditions. Single-crystal α-Fe whiskers were nitrided at 823 K and a nitriding potential of 0.7 atm-1/2 for 20 min. The resulting microstructure and phases, as well as the crystallographic orientation of crystallites belonging to a particular phase, were characterized by scanning electron microscopy coupled with electron backscatter diffraction. The habit planes were investigated by single- and two-surface trace analysis. The α-Fe whiskers partly transform into γ'-Fe4N, where γ' grows mainly in a plate-like morphology. An orientation relationship close to the rational Pitsch orientation relationship and {0.078 0.432 0.898}α and {0.391 0.367 0.844}γ' as habit planes were predicted by the phenomenological theory of martensite crystallography (PTMC), adopting a {101}α〈101〉α shear system for lattice invariant strain, which corresponds to a {1 1 1}γ'〈1 12〉γ' shear system in γ'. The encountered orientation relationship and the habit planes exhibit excellent agreement with predictions from the PTMC, although the transformation definitely requires diffusion. The γ' plates mainly exhibit one single internally untwinned variant. The formation of additional variants due to strain accommodation, as well as the formation of a complex microstructure, was suppressed to a considerable extent by the fewer mechanical constraints imposed on the transforming regions within the iron whiskers as compared to the situation at the surface of bulk samples.

Preparation of Α′-Fe(n)/α′-fe8n by Γ′-Fe4n Precursor

Novel Exchange-Coupled SmFe3/α-Fe Nanocomposite Magnets Fabricated by Magnetic Annealing

Bulk Alpha-Fe/Nd2fe14b Nanocomposite Magnets Prepared by the Phase Transition of Amorphous Nd9fe81co3nb1b6 under High Pressure

Critical Thickness of Α″-Fe16n2 Layer Prepared in Low-Temperature Nitriding

Synthesis Process and Growth Mechanism of Γ′-Fe 4 N Nanoparticles by Phase-Transformation

Nanostructured iron-nitrogen martensite synthesized from Fe79Mo10B10Cu1 magnetic nanocomposite alloy

Magnetic Properties and Thermal Stability of Γ′-Fe4n Nanoparticles Prepared by a Combined Method of Reduction and Nitriding

Preparation and Magnetic Properties of Nanoscale Ɛ-Fe3n Particles.

PREPARATION AND PROPERTIES OF BULK AMORPHOUS Fe-Ni-P-B-Ga ALLOYS

Magnetic Properties and Thermal Stability of Nanocrystalline Ε-Fe3n Prepared by Gas Reduction-Nitriding Method

Effect of Microstructure Before Nitrogenation on Magnetic Properties of SmFeN Alloys

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Synthesis of α′′-Fe16N2 ribbons with a porous structure

Structural Stability and Magnetism of Γ′-Fe4n and CoFe3N Compounds

Fabrication and Physical Properties of [fe/fe4n]n Multilayers with High Saturation Magnetization

Massive transformation in FeNi nanopowders with nanotwin-assisted nitridation

Preparation, Magnetic and Mechanical Properties of Fe/Ni-Based Amorphous Fibers

Nanocrystalline Soft Magnetic Ribbon with Α″-Fe16n2 Nanocrystallites Embedded in Amorphous Matrix

Crystallography of γ'-Fe4N formation in single-crystalline α-Fe whiskers

Magnetic Properties Enhancement Of Nd2fe14b/Alpha-Fe Nanocomposites With A Combined Addition Of Cu And Ti

Isothermal decomposition behavior of the high nitrogen concentration γ-Fe[N] prepared from pure iron