Abstract:According to the process characteristics and working principle of high heat input welding steel, the continuous cooling phase transition behavior of coarse‐grained heat‐affected zone and the competitive nucleation mechanism of intracrystalline ferrite are studied. It provides that the prior austenite grain size still has some influence on the effective activation energy of phase transformation during continuous cooling. The effect of austenite grain on the phase transformation of low‐carbon microalloyed steel during continuous cooling is investigated by using Gleeble thermal simulator. The austenite grain size is changed by altering the holding period at the peak temperature. The findings demonstrate that for a given cooling rate, the longer the holding time, the microstructure becomes finer, and bainite begins to show up in the microstructure. The critical temperature of phase transformation and the diagram of phase transformation reaction rate during continuous cooling are determined by dilatometry. The Johnson–Mehl–Avrami–Kolmogorov equation is used to fit the transformation volume fraction, and the variation of kinetic parameters k and n with prior austenite grain size under nonisothermal condition is determined. The n value is trending downward as the prior austenite grain size increases, while the kinetic parameter k barely changes at all. The activation energy of phase transition is calculated by Kissinger method. The activation energy of fine austenite grain increases from 248.6 to 286.3 kJ mol−1 with the increase of austenite grain size, while the activation energy of coarse austenite grain decreases to 176.5 kJ mol−1 due to the competitive nucleation mechanism.

Intermediate Temperature Transformation of the High-nitrogen Austenite

Research on Mediate Temperature Decomposition of High Nitrogen Austenite

Effect of Austenitization Conditions on the Transformation Behavior of Low Carbon Steel Containing Ti⁻Ca Oxide Particles

A Jmak-Like Approach For Isochronal Austenite-Ferrite Transformation Kinetics In Fe-0.055 Wt-%N Alloy

Kinetic Transitions and Mn Partitioning During Austenite Growth from a Mixture of Partitioned Cementite and Ferrite: Role of Heating Rate

In-situ Observation on the Isothermal Decomposition Process of Γ-Fe[n] by X-ray Diffraction

Austenite Formation and Cementite Dissolution During Intercritical Annealing of a Medium-Manganese Steel from a Martensitic Condition

Nucleation of Austenite from Pearlitic Structure in an Fe–0.6C–1Cr Alloy

Transition Between Alloy–element Partitioned and Non-Partitioned Growth of Austenite from a Ferrite and Cementite Mixture in a High-Carbon Low-Alloy Steel

In-Situ High Temperature X-Ray Studies on Bainitic Transformation of Austempered Silicon Alloyed Steels

Effects of Nano Precipitates in Austenite on Ferrite Transformation Start Temperature During Continuous Cooling in Nb–Ti Micro-alloyed Steels

Effects of acicular ferrites on crystallography and incomplete transformation of low-carbon low-alloy steel

Unraveling the Effects of Austenitizing Temperature and Austenite Grain Size on the Crystallographic Characteristics and Mechanical Properties of Martensitic Transformation Products in a Low-Alloy Steel

Microstructural evolution during the austenite-to-ferrite transformation from deformed austenite

The Effect of Inclusions on a Medium Temperature Transformation Microstructure and Toughness of High-Strength HSLA Steel

Inversion of Nitrogen Redistribution in Austenitic Steel by Severe Plastic Deformation

Isothermal decomposition behavior of the high nitrogen concentration γ-Fe[N] prepared from pure iron

Effect Mechanism of α-Ferrite Sustained Precipitation on High-Temperature Properties in Continuous Casting for Peritectic Steel

Nanoprecipitation-suppressed Ferrite Transformation (γ → Α) During Tempering in a Medium‑manganese Steel

Thermodynamic Interpretation Of The Martensitic Transformation In Ultrafine Gamma-Fe(N) Particles

Effect of Austenite Grain Size on Phase Transformation Structure of Low‐Carbon Microalloyed Steel