Abstract:The δ-ferrite decomposition has been widely reported in conventional Fe-Cr-Ni austenitic stainless steel during thermal aging. However, a novel phenomenon is found in a Si-modified austenitic stainless steel, that δ-ferrite decomposition is suppressed, replaced by the decomposition of adjacent austenite. Herein, the decomposition behavior of austenite adjacent to δ-ferrite and its effect on impact toughness in a Si-modified austenitic stainless steel during aging at 550°C up to 3000 h have been investigated. During thermal aging, austenite adjacent to δ-ferrite is decomposed in the following sequence: (1) γ → M 23 C 6 + α transformation takes place. The preferential formation of secondary M 23 C 6 carbides not only rejects Si atoms into the surrounding austenite but also produces a C-depleted zone. The transformation of austenite to ferrite is induced in the Si-riched and C-depleted micro-zone. (2) The growth of secondary M 23 C 6 carbides induces a continuous rejection of Ni and Si atoms into M 23 C 6 /γ and M 23 C 6 /α interfaces, and the strong attractive interaction between Ni and Si provides the chemical driving force for nucleation of M 6 C carbides and G-phase. (3) With prolonged aging time, the lower C, high Ni, and high Si concentrations in the frontier of decomposed austenite will promote the preferential precipitation of M 6 C carbides rather than M 23 C 6 carbides. During impact deformation, microcracks caused by strain incompatibility between secondary M 23 C 6 and α-ferrite, resulting in a slight decrease in impact toughness. As austenite decomposition proceeds, the higher strain incompatibility across M 6 C/α interfaces leads to brittle cleavage fracture, resulting in a significant decrease in impact toughness.

Research on Mediate Temperature Decomposition of High Nitrogen Austenite

Mediate Temperature Transformation on Grain Boundaries of High-Nitrogen Austenite

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

Intermediate Temperature Transformation of the High-nitrogen Austenite

A Special Phase Transformation Phenomenon in High-Nitrogen Austenite

Microstructure and Characterization of High Hardness Produced in High-Nitrogen Austenite Intermediate Temperature Transformation

Research on the thermal plasticity of the 18Mn-18Cr-0.77N-2Mo high nitrogen austenitic stainless steel

Studies on the Sample Preparation and Mediate Temperature Isothermal Tempering Process for Austenite with Homogeneous Nitrogen Content

Isothermal decomposition behavior of the high nitrogen concentration γ-Fe[N] prepared from pure iron

In-situ Observation on the Isothermal Decomposition Process of Γ-Fe[n] by X-ray Diffraction

Isothermal transformation of high-nitrogen austenite

A Special Phase Transformation Phenomenon in High Degree of Supersaturation Nitrogenous Supercooled Austenite

Morphology and Crystallographic Orientation Relationship in Isothermally Transformed Fe–N Austenite

Initiatory Investigation on High-density Nano Precipitation of(非汉字符号) in Fe-N Austenite

Inversion of Nitrogen Redistribution in Austenitic Steel by Severe Plastic Deformation

Austenite decomposition behavior adjacent to δ-ferrite in a Si-modified Fe-Cr-Ni austenitic stainless steel during thermal aging at 550°C

Carbonitride Dissolution And Austenite Grain Growth In A High Cr Ferritic Heat-Resistant Steel

Kinetic Transitions and Mn Partitioning During Austenite Growth from a Mixture of Partitioned Cementite and Ferrite: Role of Heating Rate

A Study of Decomposition of Supercooled Austenite in High-Strength Medium-Carbon Complexly Alloyed Cold-Resistant Steels

Austenite Formation and Cementite Dissolution During Intercritical Annealing of a Medium-Manganese Steel from a Martensitic Condition

An Extraordinary Reversed Austenite Transformation Behavior in a Cu-Rich Medium Manganese Steel