Abstract:Amorphous SiBCN ceramics are a unique class of structure materials with potential applicationsas high-temperature heat-resistant structural components owing to their combination of special structure and properties of low specific weight, high specific strength and excellent damage tolerance at elevated temperatures. However, it is still in need for further mechanical properties improvements for actual demands by rational co-design of architecture and chemistry as well as understanding the basic features of morphological/microstructural evolution and failure behavior. Thus in this attempt, to target the dense amorphous Si2ByC2N (y=1.5～4) monoliths with high mechanical properties, an attractive way of combinatorial mechanical alloying and high-pressure sintering technique (1000 oC/3～5 GPa/30 min) was proposed using elemental powders of graphite, hexagonal BN, cubic Si and boron as raw materials. The sintering pressure induced microstructural evolution, phase transformation and thermal stability have been investigated by XRD, SEM, TEM and TG measurements, and mechanical performance, especially the fracture behavior was also discussed in details. Results clearly presented that an increase in sintering pressure promoted the phase transformation of completely amorphous matrix to a hybrid structure of substantial amorphous phases and few nanocrystals of metal c-Si and/or t-BN(C) for some monoliths, implying boron-content depending phase composition. High-pressure sintering effectively promoted the densification leading to free volume annihilation and the river-like fracture morphology occurrence. A monotonous increase of the bulk density, nano hardness and Young's modulus as a function of the sintering pressure was observed. Under the same sintering conditions, the increase in boron content weakened the mechanical properties and thermal stability of the amorphous Si2ByC2N (y=1.5～4) monoliths. Dense amorphous Si2B1.5C2N monoliths consolidated at 1000 oC/5 GPa/30 min showed the best performance with the bulk density, nano hardness and Young's modulus obtaining at 2.69 g/cm3, 33.6±2.2 GPa and 414.2±16.5 GPa, respectively.

Amorphous silicoboron carbonitride monoliths resistant to flowing air up to 1800 °C

In Situ Formation of the TiCN Phase in SiBCN Ceramic Aerogels Enabling Superior Thermal and Structural Stability Up to 1800 °C.

Crystallization Behavior of Amorphous Si2bc3n Ceramic Monolith Subjected to High Pressure

Polyborosilazane‐Derived High Temperature Resistant SiBCNO

Polymer derived SiBCN(O) ceramics with tunable element content

High-temperature Oxidation Resistance of Dense Amorphous Boron-Rich SiBCN Monoliths

High temperature stable, amorphous SiBCN microwave absorption ceramics with tunable carbon structures derived from divinylbenzene crosslinked hyperbranched polyborosilazane

High temperature oxidation kinetics of amorphous silicoboron carbonitride monoliths and silica scale growth mechanisms determined by SIMS

Fabrication of Dense SiBCN Monolith at a Lower Temperature Andits High-Temperature Performance

Boron‐dependent Microstructural Evolution, Thermal Stability, and Crystallization of Mechanical Alloying Derived SiBCN

Oxidation kinetic behavior of SiBCN-Ta4HfC5 ceramics at 1600 °C

Boron-dependent self-healing behavior and mechanical properties of polymer-derived amorphous SiBCN monoliths

Oxidation Behavior of Amorphous and Nanocrystalline SiBCN Ceramics – Kinetic Consideration and Microstructure

Microstructural evolution and mechanical performance of high-pressure sintered dense amorphous SiBCN monoliths

Microstructural evolution and oxide layer structure of Csf/SiBCN composites during oxidation at 1500 °C

Effects of boron addition on the high temperature oxidation resistance of dense sSiBCN monoliths at 1500 °C

Polyborosilazane with Broadly Tunable Boron Content for SiBCN Ceramics

Effect of boron content on the microstructure and electromagnetic properties of SiBCN ceramics

Carbon content-dependent microstructures, surface characteristics and thermal stability of mechanical alloying derived SiBCN powders

Microstructure, Oxidation and Thermal Shock Resistance of Graphene Reinforced Sibcn Ceramics

Oxidation Behavior of Amorphous Si-(B)-C-N Ceramic in Ambient Air