Abstract:To further improve the thermal shock resistance and ablation resistance of SiBCN system ceramics targeted much harsh environment, both ultra-high temperature ceramic phases and carbon fibers are expected to be incorporated simultaneously as the reinforcements. However, tough problems like difficulty in densification as well as degradation of C fibers (Cf) due to interfacial reaction usually cannot be avoided. Thus, in this study, Zr as well as chopped Cf with BN coating were introduced into SiBCN ceramics by mechanical alloying and after hot-pressing sintering to prepare C/SiBCNZr composites. The structure and phase component development have been characterized in detail by XRD, SEM, TEM and XPS etc., and mechanical properties, fracture behavior and toughening mechanisms were also investigated. Zr-B and Zr-O bonds are detected besides Si-C, N-B and N-B-C bonds when pre-alloyed ZrB2 amorphous powder was incorporated into SiBCN system by further mechanical-alloying treatment. After hot-pressing, the ultra-high temperature phases of ZrB2 and ZrN were formed as expected besides the original matrix phases of BN(C) and SiC. Excellent mechanical properties can be obtained for SiBCNZr ceramic. The BN coating on carbon fibers successfully avoids the severe fiber degradation and makes it possible for moderating strong interface bonding, which ensuring the debonding, crack deflection, fiber pulling-out and bridging during the fracture. As a result, the C/SiBCNZr composites retain good mechanical properties and fractures in a pseudoplastic fracture manner, showing better potential applications in harsh environments. Optimization of the BN coating on Cf and Zr incorporation by pre-mechanical alloying can be a good route to achieve Cf/SiBCNZr composites with a better balance between thermal shock resistance, ablation resistance and mechanical properties.

Polyborosilazane‐Derived High Temperature Resistant SiBCNO

Polymer derived SiBCN(O) ceramics with tunable element content

In Situ Formation of the TiCN Phase in SiBCN Ceramic Aerogels Enabling Superior Thermal and Structural Stability Up to 1800 °C.

Polyborosilazane with Broadly Tunable Boron Content for SiBCN Ceramics

Pseudo low-temperature sintering effect and microstructure evolution of SiBCO ceramics

High-Temperature Resistant Polyborosilazanes with Tailored Structures

Crystallization Behavior of Amorphous Si2bc3n Ceramic Monolith Subjected to High Pressure

High temperature stable, amorphous SiBCN microwave absorption ceramics with tunable carbon structures derived from divinylbenzene crosslinked hyperbranched polyborosilazane

Synthesis, microstructure and electromagnetic properties of Hf-based SiBCN ceramics

Hyperbranched polyborosilazanes derived SiBCN ceramic for high-temperature wave-transparent performance

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

The role of carbon in microstructure evolution of SiBCO ceramics

Polyborosilazanes with Controllable B/N Ratio for Si–B–C–N Ceramics

Molecular-Level Processing of Si-(B)-C Materials with Tailored Nano/Microstructures

The oxidation resistance mechanism of SiC-B4C-xAl2O3 ceramics at 1400 °C in air atmosphere

Hot pressed SiC ceramics employing polymer-derived SiBCN as sintering aid

Chemical Stability Study of BaCe0.9Nd0.1O3−α High-Temperature Proton-Conducting Ceramic

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics

Enhanced ablation resistance of HfB2-HfC/SiBCN ceramics under an oxyacetylene torch environment

Fabrication of polymer-derived SiBCN ceramic temperature sensor with excellent sensing performance