Dice-and-fill Processing and Characterization of Microscale and High-Aspect-ratio (K, Na)NbO3-based 1–3 Lead-Free Piezoelectric Composites

Muhammad Saleem Mirza,Qing Liu,Tariq Yasin,Xiaomei Qi,Jing-Feng Li,Masroor Ikram

DOI: https://doi.org/10.1016/j.ceramint.2016.03.198

IF: 5.532

2016-01-01

Ceramics International

Abstract:Piezoelectric composites with high-aspect-ratio lead-free piezoelectric microrods embedded in a polymer matrix were fabricated by applying the modified dice-and-fill method to a (K,Na)NbO3-based piezoelectric ceramic, 0.9475[Li0.02(K0.48Na0.53)0.98](Nb0.80Ta0.20)O3–0.0525AgSbO3–0.5wt% MnO2 (abbreviated as LKNNT–AS–M) with enhanced piezoelectricity but low mechanical strength. The Pb-free LKNNT–AS–M/polymer composite specimens containing ∼10–23vol% ceramic pillars with sectional width ∼50μm, separation ∼55–110μm and high aspect ratio ∼11, were prepared and investigated with an emphasis on their electrical properties. The developed composites possess a higher thickness factor kt ∼63–67%, lower planar factor kp ∼27–34% and enhanced kt/kp ratio ∼2.3. The composites also possess favorable properties which includes low electrical (tanδ ∼0.029) and mechanical (Qm ∼6) losses, low acoustic impedance Z ∼4.2–7.8Mrayl and ∼5 times higher voltage coefficient g33 compared to LKNNT–AS–M piezoceramic. The promising results indicate that the LKNNT–AS–M/polymer composites have the potential to be used as active elements in high performance ultrasonic transducers.